Function setting Operation
The basic operating procedure for using this function is described below. The individual function items are covered in the operating procedures.
1Select the source Press the [SRC] button.
Function items vary from source to source.
2Enter Function setting mode Press the [VOL] knob.3Select the setting itemTurn the [VOL] knob and press it when the desired item is displayed.
Repeat the operation until your desired setup item is selected.
Operation example:
| 3 | 4 | 3[ | ] |
|
| 1[VOL] | ||
Exit Settings 2 |
|
|
| |
| Seek Mode |
|
| |
1 | 1 |
|
|
|
| Auto Memory 2[VOL] | 4[ | ] | |
| … |
|
|
|
Audio Control |
|
|
| |
… |
|
| 1 sec. |
In this manual, the above selection is indicated as
Select “SETTINGS” > “SEEK MODE”.4Make a settingTurn the [VOL] knob to select a setting value, and then press the [VOL] knob.5Exit Function setting modePress the [ ] button for at least 1 second.English 9