Important items

Maintenance

Maintenance of the unit

 

In regard to contact cleaner

 

When the front panel or case becomes dirty, wipe with a soft,

 

Do not use contact cleaners because it could cause a malfunction.

dry cloth. Do not use thinner, benzine, alcohol, etc. for these

 

Be specially careful not to use contact cleaners containing oil, for

agents may cause discoloration.

 

they may deform the plastic component.

 

 

 

Reference

Disc handling precautionsHandling

Hold the disc so that you do not touch the playing surface.

Label side

Playing side

Sticker

Do not attach paper or tape to either the playing side or the label side of the disc.

Sticky paste

Cleaning

If there are fingerprint marks or foreign matter found on the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards in a radial manner.

Storage

When a disc is not to be played for a long period of time, remove it from the player and store it in its case.

Never play a cracked or warped disc

During playback, the disc rotates at high speed in the player. Therefore, to avoid danger, never use a cracked or deformed disc or a disc repaired with tape or adhesive agent. Please do not use discs which are not round because they may cause malfunction.

Disc accessories

The disc accessories (stabilizer, protection sheet, protection ring, etc.) which are marketed for improving the sound quality or protecting discs as well as the disc cleaner should not be used with this system because they may cause malfunction.

Preparations

Note related to transportation and movementBefore transporting or moving this unit, carry out the following operations.1.Set the POWER ON/OFF switch to the ON without loading a disc.2.Wait a few seconds and verify that the display shown appears.(no disc)3. Set the POWER ON/OFF switch to OFF.
Caution on condensation

Condensation(ofdew)mayoccurinsidetheunitwhenthereisagreat differenceintemperaturebetweenthisunitandtheoutside.Thisunit may not function properly if condensation occurs. In this case, leave the unit for a few hours and restart the operation after the condensation has dried up.

Be specially cautious against condensation in the following circum- stances:

When this unit is carried from one place to another across a large difference in temperature, when the humidity in the room where this unit is installed increases, etc.

11 EN