Set Up functions
LANGUAGEDISPLAY
Menu Language
Select a language for the Setup menu and on-screen display.
Disc Audio/ Disc Subtitle/ Disc Menu 
Select the language you prefer for the audio Track (disc audio), subtitles, and the disc menu
Original: Refers to the original language in which the disc was recorded.
Other: To select another language, press numeric keys then ENTER key to enter the corresponding digit number according to the language code list in the reference chapter. If You enter the wrong Language code, press
CLEAR key. | ¡ |
TV Aspect
4:3: Select when a standard 4:3 TV is connected.
16:9: Select when a 16:9 wide TV is connected.
Display Mode
Display Mode setting works only when the TV Aspect mode is set to "4:3".
Letterbox: Displays a wide picture with bands on the upper and lower portions of the screen.
Panscan: Automatically displays the wide Picture on the entire screen and cuts off the portions that do not fit.
Progressive Scan
If you are using the COMPONENT VIDEO jacks, but are connecting the DVD Player to a standard (analog) televi- sion, set Progressive Scan to Off.
If you are using the COMPONENT VIDEO jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On.
Note
Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit.
1Press 7 (stop) key to stop any disc that is playing.
2Press 7 (stop) key again for more than 5 seconds.
The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor.
TV Output Select (only for Europe)
Set the player's TV Output Select options according to the TV connection type.
RGB: When your TV is connected with the SCART jack.
YCB CR: When your TV is connected with the COMPO- NENT VIDEO jacks on the DVD player.
Preparations