System Connections
Make connections as shown below.When connecting the related system components, refer also to the instruction manuals of the related components.
Connect the components as shown in the diagram. Only plug the AC power cord into an AC wall outlet once connections are completed.
If operation is not possible or erroneous display appears even though all connections have been made properly, reset the microcomputer referring to "In case of difficulty". ‹
Preparations
CAUTION
Install the equipment so that the power outlet is easily accessible and, in case of emergency, immediately unplug the power cord from the power outlet.
The power in this equipment will not be completely cut off from the AC wall outlet when the main switch is turned OFF.
Connecting to a TV with video (composite) orVideo cord
Audio cord
TV | Rear panel example |
(for U.S.A.) |
R L
AUDIO VIDEO
INPUT
S VIDEO
* Connect only either the video (com(Except for Europe)
Connecting to a TV with SCART input terminal (For Europe) & "TV Output Select (only for Europe)"
TV | Rear panel example |
( For Europe) | |
| INPUT |
| SCART |
SCART cable (Commercially available)
Make sure the DVD player is connected directly to the TV and not to a VCR, otherwise the DVD image could be distorted by the
Note | copy protection system. |
|