34

DVD Dynamic Range

1Press Cursor up/down (5/°) keys on the remote to select Dynamic Range on the set up menu dis-

play, then press the ENTER key.

(Dynamic Range menu appears.)

Operations

on the remote to select Dynamic

 

2Press Cursor up/down (5/°) keys

 

Range mode (on or off), then press

 

the ENTER key.

÷Press PLAY key to resume normal playback.

DTS disclaimer clause

When playing DTS-encoded (CDs, DVDs), excessive noise will be exhibited from the analog stereo outputs. To avoid possible damage to the audio system, the consumer should take proper pre-cautions when the analog stereo outputs of the DVD player is connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the digital output (S/P DIF, AES/EBU, or TosLink) of the DVD player.

Set Up functions

DVF-3530 / DV-402

DVD Digital Audio Out

PCM

: Choose this setting for all connection

 

scenarios, except the Dolby Digital or

 

DTS receiver or decoder connection.

Dolby Digital : Choose this setting if you connected Dolby Digital receiver or decoder to your DVD player.

MPEG-2/DTS : Choose this setting if you connected DTS receiver or decoder to your DVD player

1Press Cursor up/down (5/°) keys on the remote to select Digital Au- dio Out on the set up menu dis-

play, then press the ENTER key.

(Digital Audio Out display appears.)

2Press Cursor up/down (5/°) keys

on the remote to select specific Digital Audio Out mode, then press the ENTER key.

÷Press PLAY key to resume normal playback.