cup stand, drip tray
●Empty the drip tray regularly. You’ll know when it is full, the red float in the middle of the drip tray will rise and become visible in the hole on the cup
stand.
1 Wash then dry.
coffee outlet
●After every use check that this area is clean and free from any coffee grounds. Wipe clean and if necessary carry out the following procedure to clean more thoroughly. Failure to keep this area clean will affect the quality of the coffee produced and may damage the unit.
1Using a screwdriver , unscrew the screw that holds the coffee outlet in place (do not remove the inner cover).
2Clean the area with a damp cloth.
3Clean the removed outlet thoroughly in hot soapy water using a brush. Rinse thoroughly. Make sure the holes are not blocked, if necessary use a pin to clean.
4Reverse the above procedure to re fit to the outlet.
Failure to clean the coffee outlet and the filters as described invalidates the guarantee.
descaling
It is advisable to discale the coffee maker after 200 cups of coffee have been
made.
1We recommend purchasing a product specifically for descaling espresso coffee machines. Use the quantities recommended by the proprietary descaler but do not exceed the 1 litre tank capacity.
2Make sure the filter holder is not attached and position a bowl under the coffee outlet and a jug under the steam nozzle.
3Press the on/off button then press the coffee button and open the variable steam knob by turning
4Switch off and unplug the coffee maker and leave the machine to sta nd for 15 minutes.
5Repeat step 3 and allow all the descaler to flow out of the machine. Switch off.
6Thoroughly rinse the tank and fill with fresh water.
7Follow step 3 allowing the water to flush out of the hot water nozzle and also the coffee outlet. Repeat with a fresh tank of water. This will remove all traces of the descaler.
Repairs caused by malfunctioning due to a build up of limescale in the product are not covered by the guarantee if the descaling process is not carried out regularly.
service and customer care
●If the cord is damaged it must, for safety reasons, be replaced by Kenwood or an authorised Kenwood repairer.
UK
If you need help with:
●using your espresso machine
●servicing or repairs (in or out of guarantee)
call Kenwood Customer Care on 023 9239 2333. Have your model number ready - it's on the underside of your espresso.
spares
call 0870 2413653
other countries
●Contact the shop where you bought your espresso.
●Designed and engineered by Kenwood in the UK.
●Made in China.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a
guarantee (UK only)
If your espresso goes wrong within one year from the date you bought it, we will repair or replace it free of charge provided:
●you have not misused, neglected or damaged it;
●it has not been modified (unless by Kenwood);
●it is not
●it has not been used commercially;
●you have not fitted a plug incorrectly; and
●you supply your receipt to show when you bought it.
This guarantee does not affect your statutory rights.
4
