Kenwood FP980 manual to use the mini processor bowl, midi bowl, centrifugal juicer if supplied

Models: FP980

1 12
Download 12 pages 7.04 Kb
Page 8
Image 8

 mini processor bowl mini processor bowl

Use the mini processor bowl to chop herbs and process small quantities of ingredients e.g. meat, onion, nuts, mayonnaise, vegetables, purées, sauces and baby food.

amini processor knife blade

bmini processor bowl

to use the mini processor bowl

1Fit the detachable drive shaft and bowl onto the power unit .

2Fit the mini processor bowl - ensuring the ribs on the insid e of the mini bowl chimney align with the slots in the main bowl chimney ￿.

3Place the knife blade over the drive shaft ￿.

4Add the ingredients to be processed.

5Fit the lid and switch on.

safety

Never remove the lid until the knife blade has completely stopped.

The knife blade is very sharp - always handle with care. important

Don’t process spices – they may damage the plastic.

Don’t process hard food such as coffee beans, ice cubes or chocolate – they may damage the blade.

hints

Herbs are best chopped when clean and dry.

Always add a little liquid when blending cooked ingredients to make baby food.

Cut foods such as meat, bread, vegetables into cubes approximately 1-2 cm (12 34 in) before processing.

When making mayonnaise add the oil down the feed tube.

to use the mini processor bowl midi bowl

An extra bowl is supplied which can be used with all the discs. Just fit inside the main bowl and fit the discs and lid as stated in the slicing/shredding disc section.

 midi bowl centrifugal juicer (if supplied)

Use the centrifugal juicer for making juice from firm fruit and vegetables.

apusher

blid

cpulp remover

dfilter drum

ebowl

fjuicing spout

gjuicer drive adaptor

to use the centrifugal juicer

1Fit th e juicer dr ive adaptor onto t he po wer unit ￿ – push d own light ly t o ensure the adaptor is located correctly.

2Then fit the juicer bowl. Place the handle towards the back and turn clockwise until it locks  centrifugal juicer (if supplied).

3Place the pulp remover into the filter drum - ensuring the tabs locate with the slots in the bottom of the drum to use the centrifugal juicer .

4Fit the filter drum safety.

5Place the attachment lid onto the bowl, turn until it locks and the feed tube sits over the handle  attachment storage box Your juicer will not operate if the bowl or lid are not fitted correctly into the interlock.

6Place a suitable glass or jug under the juice outlet.

7Cut the food to fit the feed tube.

8Select auto and push down evenly with the pusher - never put your fingers in the feed tube. Process fully before adding more.

After adding the last piece, let the juicer run for a further 30 se conds to extract all the juice from the filter drum.

safety

Do not use the juicer if the filter is damaged.

The cutting blades on the base of the filter drum are very sharp, take care when handling and cleaning the drum.

6

Only use the pusher supplied. Never put your fingers in the feed tube. Unplug before unblocking the feed tube.

Before removing the lid, switch off and wait for the filter to stop. important

If the juicer starts to vibrate, switch off and empty the pulp from the drum. (The juicer vibrates if the pulp becomes unevenly distributed).

Maximum capacity that can be processed at one time is 1Kg of fruit or vegetables (refer to speed chart).

Some very hard foods may make your juicer slow down or stop. If this happens switch off and unblock the filter.

Switch off and clear the pulp collector regularly during use. hints

Before processing remove stones and pips (eg pepper, melon, plum) and tough skins (eg melon, pineapple). You don’t need to peel or core apples and pears.

Use firm, fresh fruit and vegetables.

To maximise juice extraction place small quantities at a time in the feed tube and push down slowly.

Citrus fruit - peel and remove the white pith, otherwise the juice may taste bitter. For best results use the citrus press.

care & cleaning attachment storage box

Your food processor is supplied with a storage box for your bowl attachments and discs.

1Fit the whisk, knife blade, dough tool and discs into the storage box when not

in use Manual background.

2The storage box is fitted with a safety lock Manual background - close the lid and slide the latch to the left to lock Manual background. To open slide the latch to the right Manual background.

care & cleaning

Always switch off and unplug before cleaning.

Handle the blades and cutting discs with care - they are extremely sharp.

Some foods may discolour the plastic. This is perfectly normal and won’t harm the plastic or affect the flavour of your food. Rub with a cloth dipped in vegetable oil to remove the discolouration.

power unit

Wipe with a damp cloth, then dry. Ensure that the interlock area is clear of food debris.

Store excess cord in the storage area at the back of the machine Manual background. detachable drive shaft/juicer drive adaptor

Wipe with a damp cloth, then dry.

Do not immerse the drive shaft or adaptor in water.

liquidiser/mill

1Empty the goblet/jar before unscrewing it from the blade unit.

2Wash the goblet/jar by hand.

3Remove and wash the seals.

4Don’t touch the sharp blades – brush them clean using hot soapy water, then rinse thoroughly under the tap. Don’t immerse the blade unit in water.

5Leave to dry upside down.

twin beater geared whisk

Detach the beaters from the drive head by gently pulling them free. Wash in warm soapy water.

Wipe the drive head with a damp cloth, then dry. Do not immerse the drive head in water.

Page 8
Image 8
Kenwood FP980 manual to use the mini processor bowl, midi bowl, centrifugal juicer if supplied, attachment storage box