safety
●Never remove the lid until the cutting disc has completely stopped.
●Handle the cutting discs with care - they are extremely sharp.
●Do not overfill the bowl – do not exceed the maximum capacity level marked on the bowl.
to use the cutting discs
1 Fit the bowl onto the power unit, add the detachable drive shaft 2.
2Holding by the centre grip, place the disc onto the drive shaft with the appropriate side uppermost bk.
3Fit the lid.
4Put the food in the feed tube.
Choose which size feed tube you want to use. The pusher contains a smaller feed tube for processing individual items or thin ingredients.
To use the small feed tube - first put the large pusher inside the feed tube.
To use the large feed tube - use both pushers together.
5Switch on and push down evenly with the pusher - never put your fingers in the feed tube.
hints
●Use fresh ingredients
●Don’t cut food too small. Fill the width of the feed tube fairly full. This prevents the food from slipping sideways during processing. Alternatively use the small feed tube.
●When using the Julienne disc, place ingredients horizontally.
●When slicing or grating: food placed upright bl comes out shorter than food placed horizontally bm.
●Food placed upright comes out shorter than food placed horizontal.
●There will always be a small amount of waste on the disc or in the bowl after processing.
cr mini bowl and knife
Use the mini processor bowl to chop herbs and process small quantities of ingredients e.g. meat, onion, nuts, mayonnaise, vegetables, purées, sauces and baby food.
The slicing/grating discs can also be used with the mini bowl.
Insert the mini bowl without the knife blade fitted and refer to the slicing/grating disc section for fitting and usage instructions.
Do not overfill the bowl.
mini blade
mini bowl
to use the mini bowl and knife
1Fit the bowl onto the power unit, add the detachable drive shaft .
2Fit the mini bowl over the detachable drive shaft - ensure the cut out sections align with the locating tabs bn on the main bowl. Note: The main bowl lid cannot be fitted if the mini bowl is not
located correctly.
3Place the knife blade over the drive shaft bo.
4Add the ingredients to be processed.
5Fit the lid and switch on.
safety
●Never remove the lid until the knife blade has completely stopped.
●The knife blade is very sharp - always handle with care. important
●Do not process spices – they may damage the plastic.
●Do not process hard food such as coffee beans, ice cubes or chocolate – they may damage the blade.
hints
●Herbs are best chopped when clean and dry.
●Always add a little liquid when blending cooked ingredients to make baby food.
●Cut foods such as meat, bread, vegetables into cubes approximately
●When making mayonnaise add the oil down the feed tube.
cs attachment storage box
Your food processor is supplied with a storage box for your bowl attachments and discs.
1Fit the knife blade and discs into the storage box when not in use bq.
2The storage box is fitted with a safety lock - close the lid to lock. To open, push the tab in br and lift up the lid bs.
ct compact chopper/grinder (optional)
Use the compact chopper/grinder for processing dry ingredients such as nuts, coffee beans and it is also suitable for processing a range of spices such as: -
Black peppercorns, cardamom seeds, cumin seeds, coriander seeds, fennel seeds, fresh ginger root, fresh chillies and whole cloves.
sealing ring blade unit lid
jar
to use your compact chopper/grinder
1Put your ingredients into the jar. Fill it no more than half full.
2Fit the sealing ring to the blade unit.
3Hold the underside of the blade unit and insert the blades int o the jar – turn
4Place the compact chopper/grinder onto the power unit and turn clockwise to lock ck.
5Use the Auto button, or select a speed (refer to the recommended speed chart).
safety
●Never fit the blade unit to your food processor without the jar fitted.
●Never unscrew the jar while the compact chopper/grinder is fitted to your appliance.
●Do not touch the sharp blades – Keep the blade unit away from children.
●Never remove the compact chopper/grinder until the blades have completely stopped.
●To ensure the long life of your compact chopper/grinder, do not run it continuously for longer than 60 seconds. Switch off as soon as you have got the right consistency.
8
