Demonstration method, To stop demonstration

Display

G-EQ300 (En/K)

Demonstration of equalizer curves can be displayed to help the user understand the features of the equalizer better.

1 1

: Keys and control used in the operations described on this page.

Demonstration method

1Play a music source.

2Select the “DEMO” mode.

DISPLAY

Each press switches the display modes as follows. 1 Graphic equalizer display mode

2Spectrum analyzer display mode

3 DEMO(Demonstration) mode

Demonstration is performed repeatedly in the following order.

GRAPHIC PARAMETRIC REFERENCE

MANUAL

To stop demonstration

DISPLAY

Page 11

Image 11

Kenwood G-EQ300 Demonstration method, To stop demonstration, Play a music source 2 Select the “DEMO” mode, Display

Contents

GRAPHIC EQUALIZER G-EQ300INSTRUCTION MANUAL KENWOOD CORPORATION AC voltage selector switch Safety precautions2 Before applying power AC 110-120 / 220-240 V switchable Check that the following accessories are present Special featuresContents Accessories 3Caution Read this page carefully to ensure safe operation IMPORTANT SAFEGUARDS POWER OFF IMPORTANT SAFEGUARDS Unpacking MaintenanceCleaning Before operation 5 TAPE indicator STANDBY indicator1 MAIN POWER key Switch the unit ON mode 2 ON/STANDBY key 3 Standby indicator 8 manuals of the related components Caution regarding placement Except for U.S.A., CanadaSet the TAPE 2 MONITOR switch to the monitoring position System connections About the system control operations AV CONTROL CENTER POWER AMPLIFIER GRAPHIC EQUALIZER CASSETTE DECKRemote Control About the system control connections Graphic equalizer display mode Switching the display modesDisplay Preparation 1 Play a music source 2 Select the “DEMO” mode Demonstration methodTo stop demonstration “FLAT” key Operation of MANUAL featureTo cancel the equalizer effect Operation of graphic equalizer Operation of graphic equalizer Operation of REFERENCE featureFive exemplary patterns have been preset at the factory 3 Set to “REFERENCE” M5 Headphones Preset equalizer pattern M1 to M5Preset equalizer pattern R1 to R5 Pattern can be created and preset by the user in this mode 2 Select the “EQ.ON” mode Creation of desired equalizer patternsOperation in PARAMETRIC mode 1 Select the “graphic equalizer display mode” 7 Select the inclination of the curve 6 Adjust the level9 8 H Z 5 Select the center frequency Operation in GRAPHIC mode 4 Select the frequency band to be adjusted5 Adjust its level 6 Fine adjustment of each frequency band Registration of EQUALIZER pattern To cancel the registered pattern2Preset the equalizer pattern Any equalizer pattern can be preset if it is being dis- played The five of the genre keys are also used as the pattern No. keys 1 Play a music source 2 Initiate the GENRE mode3 Select the genre of music 4 Select the desired tone pattern Major purposes of use provided by the USE keys To cancel GENRE modeREVERSE key 5 Select the purpose of use of the pattern To stop tape playback 1 Set the TAPE switch to ONUse of equalizer effect with tape Applying equalizer effect to tape playback 4 Play the source to be recorded 5 Start recording it onto tape 1 Set the TAPE switch to OFFTape recording of sound with equalizer effect To stop tape recording Functions of graphic equalizer Compensation for the audio characteristics of the listening roomAdjustment of sound to your individual taste Functions of the graphic equalizer Cause Operation to resetSymptom In case of difficulty Equalizer characteristic variable range SpecificationsSignal to noise ratio IHF Graphic equalizer characteristics For the U.S.A FCC WARNING MEMO Serial Number For your recordsModel

Kenwood G-EQ300 instruction manual Demonstration method, To stop demonstration, Display

Models: G-EQ300

Demonstration method

1Play a music source.

To stop demonstration