Kenwood G-EQ300 instruction manual 9 8 H Z, Select the center frequency, Adjust the level, Wide

1 6

5Select the center frequency.

FREQUENCY JOG

6Adjust the level.

EQ.LEVEL

7Select the inclination of the curve.

WIDE/NARROW

8Whenor F3 isadjustmentrequired: of center frequencies F2 and/

Repeat steps 4 to 7 above for each center frequency.

When two curves F1 and F2 or three curves F1, F2 and F3 are set, the curve combining them will be displayed in a few seconds.

Creation of desired equalizer patterns

G-EQ300 (En/K)

9 8 H Z

63 98 160 250 400 625 1k

¦Pressing the FLAT key allows to start adjustment from the flat level position.

Each press switches the display as follows.

1 WIDE : Curve with a gentle slope.

2NARROW: Curve with a sharp slope.

One the two shall light up.

WIDE NARROW

63 98 160 250 400 625 1k 63 98 160 250 400 625 1k

WIDENARROW

¦One adjusted, the curve remains the same until next time it is pressed.

40 63 98 160 250 400 625 1k 1.5k 2.5k 3.9k 6.3k 10k 16 k

40 63 98 160 250 400 625 1k 1.5k 2.5k 3.9k 6.3k 10k 16 k

¦For finer adjustment, perform the graphic mode operation described

in the following page. &