Kenwood H2EC Activating Your SIRIUS Subscription

6.Your unit’s unique 12-digit SIRIUS ID Number will

be displayed (below).Write the number down,

and have your credit card handy.

7.You can also call SIRIUS toll-free at 1-888-539-

SIRIUS (7474), and the operator will instruct

you.(You can also contact SIRIUS on the

Internet at: www.siriusradio.com and click on

the “Activate”link.)

8. Once your subscription has been activated,

the display will read “Subscription Updated”

for a few seconds. Press any button.The

Here2Everywhere will return to the Default

display screen.At this point, try turning the

Control Knob.You should have access to many

channels now.

Default Screen

Removing Here2Everywhere

From the Car Docking Cradle

When docked in the Car Docking Cradle,

Here2Everywhere has a secure locking mechanism

to hold it in place while the vehicle is in motion.

To remove Here2Everywhere from the Car Docking

Cradle, press the small button on the back of the

unit and gently slide Here2Everywhere out.

Basic Operation

After you have activated your SIRIUS subscription,the

Default Display screen will appear.The Default Display

screen has two font sizes: medium and large.You can

change font sizes by pressing the Display button.

On the screen, you’ll see the current SIRIUS channel

number (001), the channel name,the artist and

song title, the category,the time, the preset bank

Installing Batteries

in the Remote

Note: Do not expose the remote control to high

temperatures or direct sunlight.This could damage

or deform the case and result in battery leakage

or other harm.

1. Remove the battery cover as shown.

2. Install two AAA batteries as shown.

3. Replace the battery cover.

Activating Your SIRIUSSubscription

Before you can listen to Here2Everywhere,you must

subscribe to SIRIUS Satellite Radio’s service.

Follow these steps to activate your service:

1. Make sure that Here2Everywhere is properly

connected.

2. Place Here2Everywhere in the Docking Station by

sliding the unit all the way into the cradle so that

the connector at the bottom of the unit makes

proper contact in the cradle.

3. Press the power button to turn Here2Everywhere

on.After displaying the SIRIUS logo, the display

will read “Acquiring Signal.”Once the SIRIUS

satellite signal is received, the display will

change to “Call 888-539-SIRIUS to Subscribe.”

Note: If the display reads,“Updating Channels,” the

receiver is getting the latest channel listing from the

SIRIUS satellites. Give it 5 minutes to complete

before moving to the next step.

4. If your Here2Everywhere has been properly con-

nected and the antenna is receiving the SIRIUS

signal (Preview Channel #184),you will hear

audio. If you do not hear audio,re-orient the

antenna until you do.(See Antenna Aiming, on

pg. 23 to use the ANTENNA SIGNAL screen.)

• Channel #184 is the SIRIUS Preview Channel.

You will not be able to tune to any other channels

until you activate your SIRIUS subscription.

Note: If you’ve previously activated your subscrip-

tion and then deactivated it,the Preview Channel

will be mute.You will still see the message, “Call

888-539-SIRIUS to Subscribe.”

5. Press the menu button on Here2Everywhere to

enter the Menu Options. Make sure the first item,

“SIRIUS ID,”is highlighted, then press the Control

Knob (or the remote Select button).

Channel

number

Signal

strength

indicator