Kenwood HM-335 Playback of TAPE

Playback of TAPE

18 EN

1.

Load a cassette tape.

2.

Start playback.

Press the TAPE 2 3 key.

To stop playback

Selection of TAPE equalizer (TAPE EQ.)

To wind tape

at high speed

Start playback

To wind tape at high speed

Playback of TAPE

÷The tape deck of the unit can play Normal (Type ) tapes.

÷When there is a tape slack, wind the tape before loading. r

Pressing the TAPE 2 3 key while the power is off will turn the power on and start tape playback if there

is a tape in the cassette deck.

Reverse mode

indication

Transport direction

indicators

Tape counter

Do not use a cassette with more than 90-minute recording time, for the

tape used with such a cassette is very thin and tends to cause troubles

such as entanglement around the pinch roller or cutting off tape.

Transport direction indicators:

Indicates the tape transport direction during playback or recording by lighting

of 2 or 3. This direction is the direction stored in memory when the tape was

last stopped.

Start playback

To stop playback

1Press the area marked 0 push open to open the cassette holder.

2Insert a tape.

3Press the area marked 0 push open to close the cassette holder.

0 push open

TAPE

0 push open

Contents

Main MICRO HI-FI COMPONENT SYSTEM INSTRUCTION MANUAL KENWOOD CORPORATION HM-335 For the United Kingdom Factory fitted moulded mains plug The marking of products using lasers Safety precautions Before applying power Caution : Read this page carefully to ensure safe operation. * AC voltage selection (For countries other than U.S.A., U.S.-Military and Canada) VOLTAGE SELECTOR 110V/220V Special features Playback capability of CD-R and CD-RW discs. Accessories Unpacking Keep this manual handy for future reference. CAUTION FCC WARNING Contents Preparation section Basic section Application section Knowledge sections System connection This figure shows the method of connection between the main unit and provided accessories. AM loop antenna AM loop antenna How to connect speaker cords to the main unit FM indoor antenna How to connect AM antenna cord to the main unit Speaker cord FM indoor antenna Connection of Other Accessories CAUTION POWER cord FM outdoor antenna Controls and indicators AUTO POWER SAVE function Display ! 5687 Main unit About the one-touch operation function Standby mode Top view Front view 1 2 3 4 5 6 7 Operation of remote control unit Operation Loading batteries 1 Remove the cover. 2 Insert batteries. 3 6 7 Basic use method Set the key (or POWER key) to ON. Pressing the key (or POWER key) when the unit is ON turns it off (Standby mode of power). Selecting the desired output. CD ^ TAPE * TUNER (Broadcasts) ) AUX (External input) [Adjusting the AUX input level ] Muting the sound temporarily Enhancement of bass 2 Listening through headphone Tone adjustment Playback of CD 1 open to open the CD lid. 2 3 open to close the CD lid. Start playback/ To pause playback To fast forward and backward To select track No. 30 : Skipping tracks Playback from desired track Playback of TAPE 1 2 3 To wind tape at high speed Selection of TAPE equalizer (TAPE EQ.) A tip for use of the tape counter To stop playback Selection of reverse mode Receiving broadcast station Receiving broadcast station 1 2 Collective presetting of stations Channel space setting 1 2 One-by-one presetting 1 4 2 Tuning to a non-preset radio station RDS (Radio Data System) Before using RDS RDS (Radio Data System) Set the reception band to FM. Preset RDS stations with the auto memory function. Program Type Name Display Searching for a desired program type RDS (Radio Data System) Start the search. To change to a different program type : Repeat steps 1, 2, 3. Recording on TAPE Load a tape in deck. Recording on TAPE 1 2 3 Recording on TAPE Select the reverse mode. ( Start recording. Select the source to be recorded. Stop the recording 4. 5. Points in CD recording Select "PGM" mode. Select track numbers in the order you want to play them. Start playback. 1 To select track No. 30 : Various CD playback features Listening to the desired sequence Use the following procedure to program desired tracks in a desired order. (up to 32 tracks) (program playback) To add a track to an existing program 1 To select track No. 30 : To clear the entire program the numeric keys. Repeated playback Setup for repeating selected tracks Playing tracks in a random order 1 2 2 3 To stop repeated playback Convenient recording methods All-track recording Single-track recording One-touch edit recording = Make preparation for recording. Select the desired CD track and play it.If it is in play mode, stop it. Be sure to put the cassette deck in stop mode. Program recording = (CD Desired CD tracks can be programed in the desired sequence and recorded onto a tape. Make preparation for recording. Listening to an AUX input source Select AUX (external input). Play the connected equipment. Adjust the volume. 4 Adjusting the AUX Input Level 1 2 Clock adjustment Adjust the hour. 1 Activate the Clock adjustment mode. Adjust the minute. Timer operation AI timer playback (PROG 1, PROG 2) Timer playback, timer recording (PROG 1, PROG 2) Sleep timer (SLEEP) Sleep timer (SLEEP) Setting the timer program (PROG. TIMER) Connect the related equipment under reference to "System connection" Adjust the clock before setting the timer Make preparations for the play (recording). Select the program timer ON/OFF. 1 Select ONETIME or EVERYDAY execution of the programed timer. 1 Set the ON time then the OFF time. Make the desired reservation. 1 For timer playback or AI timer playback For timer recording 2 3 Put the unit in standby mode. Important Items Note related to transportation and movement Maintenance Reference Maintenance of the unit Disc handling precautions Handling Cleaning To store cassette tapes Safety tab (accidental erasure prevention tab) In case of difficulty Operation to reset Tuner section Amplifier section/Speakers CD player section In case of difficulty Cassette deck section Remote control unit Displayed messages and actions to be taken against them In case of difficulty Note to CATV system installer Specifications [Amplifier section] [Tuner section] [CD player section] Main unit