System connection
11 EN
1Headphone jack %
Connect headphone with a stereo mini-plug
(optionally available).
2BEAT CANCEL switch ¶
30 CD lid ^
To load or eject a CD, press the area marked 0 push
open on the CD lid to open it.
4Display panel
5volume knob $
Turn this knob for volume adjustment.
64 and ¢ multi control keys
In the normal mode, these are used to
–skip CD tracks &
–fast forward or rewind tape (
–select a preset radio station )
In the menu mode (selected by pressing the mode key),
press these buttons to select the desired menu item. To
set or enter setting of the menu item, press the set/sound
key.
•Pressing these (multi control keys) switches the dis-
play contents.
"TAPE RVS" (
"AUTO PRESET ?" or "AUTO MEMORY ?" ¡
(Only when the TUNER input is selected)
"INPUT ?" fl
(Only when the AUX input is selected)
"TIMER ?" ·
"TIME ADJUST ?" ‡
"APS ?" 9
•The function of these keys returns to the normal mode
when they have not been operated for 20 seconds.
7 Tuning Mode key
CD, TAPE : &(
Press to stop a disc or tape operation.
TUNER : ™
Press to switch between the AUTO (auto tuning,
stereo reception) and MONO (manual tuning,
monaural reception) modes.
Standby mode:
Press to display the clock.
Each press switches the mode.
Clock display on
Clock display dimmed
Clock display off
7Cassette holder *
To load or eject a cassette tape, press the area marked
0 push open on the cassette holder to open it.
8Basic operation keys
AUX key fl
Press to reproduce the external source component
connected to the AUX (analog auxiliary input) jacks.
TUNER /band key )
Press to select the TUNER input.
This key is also used to select the received broadcast
band.
CD 6 key ^
Press to select the CD input and start playback. During
CD playback, press to pause.
TAPE 2 3 key *
Press to select the TAPE (cassette deck) input and
start playback of a tape. Pressing this key during tape
playback switches the tape transport direction.
9POWER key (For U.S.A. and Canada) $
key (For other countries) $
Press to set the unit to On or Standby.
standby/timer indicator
Lights up when the unit is set to the Standby mode of
power.
Red : Ordinary standby.
Green : Timer standby.
Off : The unit is On.
0Remote sensor #
This window receives signals from the remote control
unit.
!rec key ¶
Press to start tape recording. Pressing this key during
recording initiates record-pause after leaving a no-
sound blank of about 4 seconds.
@mode key 9
Press to switch the function of the 4 and ¢ keys to
menu select mode. Press again to reset the function of
the 4 and ¢ keys to normal mode.
#set/sound key 9
Press to select EX. BASS or LOUD sound effect or
press to set or enter an item selected with the 4 and
¢ keys.
Controls and indicators
\
\\
\
mode
set/sound