Various CD playback features
29 EN

Select "PGM" mode.

Select track numbers in the order you want to play them.

Start playback.

Select the CD input.
÷Up to 32 tracks can be programed. When "PGM FULL" is
displayed, no more tracks can be programed.
÷If you made a mistake, press the CLEAR key and enter
the track No. again.
÷When a track No. is entered, the track will be added to
the end of the existing program.
÷When the total time of CD program is 200 minutes or
more, the time display shows "
-
-
:
-
-
".
1Select the track.
2Confirm the selection.
(Go to step 2 within 20 seconds.)
Press the numeric keys as shown below....
To select track No. 23 :
10 10
,,
3
To select track No. 30 :
10 10 10
,,,
0
Various CD playback features
Use the following procedure to program desired tracks in a desired order. (up to 32 tracks)
1
2
3
Program position of the
track to be selected next.
(To select more than one track, repeat steps 1 and
2 for each track.)
÷Tracks will be played in the order they were pro-
gramed (following the program numbers).
÷When the 4 key is pressed once during playback,
the track being played will be played from the
begining.
To skip further to a track preceeding the current track,
press the 4 key twice repeatedly.
÷When the ¢ key is pressed during playback, play will
skip to the next track in the program.
Press in stop mode

Listening to the desired sequence

(program playback)

6
CD
SET
5
2
8
0
6
3
9
4
1
7
10
PGM
PGM
PGM