Controls and indicators
ENGLISH
VOLUME |
| INPUT SELECTOR |
|
POWER |
| N.B.CIRCUIT | |
| AUX | 1 | 2 |
ON OFF |
| ||
| OFF | 3 | |
|
| ||
CD
D.AUDIO
MINMAX
STEREO INTEGRATED AMPLIFIER
1 | 2 | 3 | 4 | 5 |
1 POWER switch |
|
| 4 INPUT SELECTOR knob | |
Switches the power ON and OFF. |
| Selects the input source (D.AUDIO, CD or AUX). | ||
2 VOLUME knob
Rotating the knob clockwise increases the volume level, and rotating the knob counterclockwise decreases the volume level.
3 Input indicator
The indicator for the input source selected with the INPUT SELECTOR knob lights up.
All of the indicators are extinguished when the power is switched OFF.
5 N.B. CIRCUIT knob
Adjusts the bass tone in three steps.
Select the position according to the speakers in use or your liking.
Vertical installation
The unit can be installed vertically, or on its left side, by using the pair of stands provided with it.
N.B.CIRCUIT | 1 2 | OFF | |
AMPLIFIERKA | |||
|
| 3 |
|
SELECTOR |
|
| STEREO INTEGRATED |
INPUT |
|
|
|
| AUX | CD | D.AUDIO |
|
|
| MAX |
VOLUME |
|
|
|
|
|
| MIN |
POWER | ON OFF |
POWER switch
CAUTION
Be sure to observe the following cautions when in- stalling the unit. Incorrect installation may cause the unit to turn over or topple down and cause injuries.
÷Always use the provided stands when installing the unit vertically.
÷When installing the unit vertically, position it so that the POWER switch comes at the lower position as shown in the illustration.
CAUTION
When installing the unit, be careful not to block the ventilation openings to ensure sufficient heat radia- tion. Otherwise, the heat pooled inside the unit may cause malfunction or a fire hazard.
8
