Power control |
|
|
|
|
(REMOTE) lead terminal | POWER IN |
|
|
|
| GND |
| BRIDGED |
|
| BATT | P.CON(REMOTE) | LEFT | RIGHT |
|
|
|
| SPEAKER OUTPUT |
Terminal cover |
|
|
| Right |
|
|
|
| speaker |
Power control cable |
|
|
| Left |
Battery cable (Yellow) |
|
|
| speaker |
| Ground cable (Black) | |||
•If a buzzing noise is heard from the speakers when the engine is running, connect a line noise filter (optional) to each of the battery cable.
•Do not allow the cord to directly contact the edge of the iron plate by using Grommets.
Fire wall
Grommets
Battery
Round terminal (Large)
+ | - |
NOTE
Connect the ground cable to a metal part of the car chassis that acts as an electrical ground passing electricity to the battery‘s negative - terminal. Do not turn the power on if the ground cable is not connected.
Speaker output cable terminalConnect the speaker output cables to these terminals.
Lead terminal (Commercially available part)
Speaker output cable
To prevent fire caused by a short in the wiring, connect a fusible link or breaker nearby the battery’s positive terminal.
Power terminalPass battery and ground cables through supplied terminal cover and connect to respective terminals. After completing connections, fasten terminal cover over terminal bracket.
Round terminal (Medium)
Round terminal (Small)
2CAUTION
If you wish to
Connecting a speaker with an impedance lower than 4 ohms may damage the unit. examples:
L |
| L |
|
R | ≥4Ω | R | ≥8Ω ≥8Ω |
|
|
POWER IN
GND |
| BRIDGED |
|
BATT | P.CON(REMOTE) | LEFT | RIGHT |
SPEAKER OUTPUT
Bridged
7