■Remote cable connection
Remote cable (6.0 m : 19.7 ft)
CAUTION
• Before connecting the remote controller cables, always turn the Bass boost level knob all the way to the left.
| BATT. | GND |
|
|
|
|
| REMOTE | L |
|
|
|
| |
|
|
|
| R |
FUSE [30Ax3] | P.CON | SPEAKER OUTPUT |
| LINE IN LINE OUT |
Remote cable
■ Multi Amplifier with Remote cable connection
Remote controller
You can control the Bass boost level of the second and subsequent Slave amplifiers simultaneously from the Master amplifier. The volume level of each amplifier is determined by the setting of the Master amplifier (INPUT SENSITIVITY, boost level of the remote controller).
Setting the Master amplifier
1.Adjust the INPUT SENSIVITY to the output of the center unit to be connected.
2.Set the LPF frequency and ISF.
3.Turn the LINE OUT FILTER switch ON.
Setting the Slave amplifier
1.Turn the LINE OUT FILTER switch OFF.
2.Adjust the INPUT SENSIVITY.
•To adjust the Slave amplifier to the same volume as the Master amplifier, adjust the INPUT SENSIVITY to 0.2 V (max.).
CAUTION
•Before connecting the remote controller cables, always turn the Bass boost level knob all the way to the left.
*Commercially available parts
CENTER UNIT | Remote controller |
RCA cable* | |
(CD receiver, etc.) |
|
Power control wire*
Master amplifier
BATT. | GND |
|
|
|
|
| REMOTE | L |
|
|
|
| R |
|
FUSE [30Ax3] | SPEAKER OUTPUT |
| LINE IN | OUT |
RCA cable* Extension wire*
Slave amplifier
BATT. 
GND
REMOTE | L |
|
R
LINE OUT |
| 1 | |
FILTER | 2 |
| |
ON | 0.5 | ||
| |||
| 3 | ||
| 0.3 | ||
| 4 | ||
|
| ||
| [MIN] 5 | 0.2 [MAX] |
INPUT
SENSITIVITY[V]
OFF
LINE OUT |
| 1 | |
FILTER | 2 |
| |
ON | 0.5 | ||
| |||
| 3 | ||
| 0.3 | ||
| 4 | ||
|
| ||
| [MIN] 5 | 0.2 [MAX] | |
| INPUT | ||
| SENSITIVITY[V] | ||
OFF
FUSE [30Ax3] | SPEAKER OUTPUT | LINE IN | OUT |
Slave amplifier
Hexagon Wrench | BATT. | GND |
|
|
(Small) |
|
| REMOTE | L |
|
|
|
| R |
FUSE [30Ax3] | P.CON | SPEAKER OUTPUT |
| LINE IN LINE OUT |
Use the |
|
|
|
|
attached |
|
|
|
|
Hexagon |
|
|
|
|
Wrench. |
|
|
|
|
LINE OUT |
| 1 | |
FILTER | 2 |
| |
ON | 0.5 | ||
| |||
| 3 | ||
| 0.3 | ||
| 4 | ||
|
| ||
| [MIN] 5 | 0.2 [MAX] | |
| INPUT | ||
| SENSITIVITY[V] | ||
OFF
English