RDS features

Control knob

ATT

TI

AME

1 - 6

TI

TI indicator

PTY indicator

Traffic Information

Changing to traffic information automatically when a traffic bulletin starts even when you are not listening to the radio.

Press the [TI] button.

Each time you press the button, the Traffic information function turns ON and OFF. When traffic information is ON, "TI" indicator is ON.

When a traffic information station is not being received the "TI" indicator blinks.

When a traffic bulletin starts, "TRAFFIC" is displayed and the audio changes to traffic information.

•During reception of an AM station when the Traffic Information function is turned ON, the frequency changes to an FM station.

•During reception of traffic information the adjusted volume is automatically remembered, and the next time the audio changes to traffic information, the volume automatically becomes the remembered volume.

Receiving other traffic information stations

Push the Control knob towards [4] or [¢].

•Traffic information can be switched when it is on the Tuner Source. However, you cannot switch the Traffic information during reception of the Traffic bulletin switched from the source other than the Tuner.

PTY (Program Type)

Selecting the Program Type and searching for a station.

1Enter PTY modePress the Control knob.

During PTY mode the "PTY" indicator is ON.

•This function cannot be used during a traffic bulletin or AM reception.

12 English