Kenwood KDC-334SA, KDC-334SG Power, Volume, Attenuator, Source required, Increasing Volume, Decreasing Volume, Turning ON the Power, Selecting the Source, Turning OFF the Power

Manuals / Brands / Car Audio and Video / Car Stereo System / Kenwood / Car Audio and Video / Car Stereo System

Release button

Control knob

1 28

Download 28 pages, 567.75 Kb

General features

ATT

AME

ATT VOL Q SRC

LOUD indicator

General

Clock display

ATT indicator

PowerTurning ON the PowerPress the [SRC] button.Turning OFF the PowerPress the [SRC] button for at least 1 second.Selecting the Source

Press the [SRC] button.

Source required	Display
Tuner	"TUNER"
CD	"CD"
Standby (Illumination only mode)	"STANDBY"

•This unit automatically turns full power OFF after 20 minutes lapses in Standby mode in order to save the vehicle's battery.

The time until full power OFF can be set in <Power OFF Timer> (page 18).

VolumeIncreasing VolumeTurn the [VOL] knob clockwise.Decreasing VolumeTurn the [VOL] knob counterclockwise.Attenuator

Turning the volume down quickly.

Press the [ATT] button.

Each time you press the button, the Attenuator turns ON and OFF.

When the Attenuator is ON, the "ATT" indicator blinks.

6 English

Contents

Page Connecting Wires to Terminals To prevent injury or fire, take the following precautions: To prevent damage to the machine, take the following precautions: Do Not Load 3-in.CDs in the CD slot Lens Fogging Cleaning the Unit Cleaning the Faceplate Terminals The marking of products using lasers (Except for some areas) Handling CDs When using a new CD CD accessories CD cleaning Removing CDs Power Turning ON the Power Press the [SRC] button Turning OFF the Power Press the [SRC] button for at least 1 second System Q Sound setting Display Audio Control Range Audio Setup 2Enter Audio Setup mode Press the [VOL] knob for at least 1 second 3Select the Audio Setup item to adjust Press the [VOL] knob 4Adjust the Audio setup item Turn the [VOL] knob 2Push the faceplate in until it clicks TEL Mute When a call comes in Listening to the audio during a call When the call ends Tuning 2Select the band 3Tune up or down band Push the Control knob towards [4] or [¢] Station Preset Memory Auto Memory Entry 2Open Auto Memory Entry Press the [AME] button for at least 2 seconds. "A-MEMORY"is displayed Preset Tuning 2Recall the station Traffic Information Press the [TI] button Receiving other traffic information stations PTY (Program Type) 1Enter PTY mode 2Select the Program Type No Program Type 3Search for the selected Program Type station 4Exit PTY mode Changing Language for PTY Function 2Enter Changing Language mode Press the [TI] button 3Select the language LanguageDisplay Playing CD When a disc is inserted Pause and play Eject the CD Press the [0] button Track Search Track Repeat Press the [REP] button Scan Play 1Start Scan Play Menu System 1Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed 2Select the menu item 3Set the menu item Touch Sensor Tone Setting Manual Clock Adjustment 1Select Clock Adjustment mode Push the Control knob towards [FM] or [AM]. Select the "CLK ADJ" display Local Seek Tuning Mode Tuning mode Operation AF (Alternative Frequency) Accessories Page Connector Function Guide 2WARNING Connecting the ISO Connector Page Removing the hard rubber frame General Tuner source Disc source The messages shown below display your systems condition FM tuner section MW tuner section LW tuner section CD player section Audio section