General features

Audio Setup

Setting the Sound system, such as Volume offset and Loudness.

1Select the source to adjust Press the [SRC] button.

2Enter Audio Setup modePress the [VOL] knob for at least 1 second.3Select the Audio Setup item to adjust Press the [VOL] knob.

Each time you press the knob, the item to be adjusted alternates between the items shown in the table below.

4Adjust the Audio setup item Turn the [VOL] knob.

Adjustment Item

Display

Range

Volume offset

"V-OFF"

–8 — ±0

Loudness

"LOUD"

ON/OFF

•Volume offset: Sets each source’s volume as a difference from the basic volume.

•Loudness: Compensates for low and high tones during low volume.

When Loudness is ON, "LOUD" indicator is ON.

5Exit Audio Setup mode

Press the [VOL] knob for at least 1 second.

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting the speaker type.

1Enter Standby

Press the [SRC] button. Select the "STANDBY" display.

2Enter Speaker Setting mode Press the [VOL] knob.3Select the Speaker type Turn the [VOL] knob.

Each time you turn the knob, the setting alternates between the settings shown in the table below.

8 English

Speaker type

Display

OFF

 

"SP OFF"

For 5

& 4 in. speaker

"SP 5/4"

For 6

& 6x9 in. speaker

"SP 6x9/6"

For the OEM speaker

"SP OEM"

4Exit Speaker Setting mode Press the [VOL] knob.Switching Clock Display

Changing the displayed information.

Press the control knob for at least 1 second.

Each time you press the button, the display alternates between clock display and current source.

Theft Deterrent Faceplate

The faceplate of the unit can be detached and taken with you, helping to deter theft.

Removing the FaceplatePress the Release button.

The faceplate unlocks, allowing you to detach it.

•The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.

•Do not expose the faceplate to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

Reattaching the Faceplate1Align the projections on the unit with the grooves on the faceplate.

Projections

Grooves