INSTRUCTION MANUAL
Before reading this manual, click the button below to check the latest edition and the modified pages.
Check the latest edition
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
Model
US Residence Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
© 2012 JVC KENWOOD Corporation | IM360_Ref_K_en_01 |
How to read this manual
Function setting procedure
For the procedure for selecting a setting item in the Function setting mode, see the following example:
Example: Adjusting the contrast of the display
1Enter the Function setting mode Press and hold the Control knob. “Function” is displayed.
2Select the Contrast function item
Play Mode |
|
|
|
|
|
|
| |
Settings |
|
| Clock&Date |
|
|
| ||
|
|
|
| |||||
|
|
|
|
| ||||
|
|
|
|
|
|
| ||
|
|
|
| DISP&ILLUMI |
|
| Display Dimmer | |
|
|
|
|
| ||||
Initial Settings |
|
| ||||||
|
|
|
| |||||
|
|
|
|
|
| Contrast | ||
|
|
|
| Tuner Settings |
|
| ||
|
|
|
|
|
| DISP NEGA/POSI | ||
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| |
Turn the Control knob to select “Settings”, and then press the Control knob.
Next, turn the Control knob to select
“DISP&ILLUMI”, and then press the Control knob.
Finally, turn the Control knob to select
“Contrast”, and then press the Control knob.
In this manual, the above operational procedure is described as follows:
2Select the Contrast function item Select the following items using the Control knob. Refer
“Settings” > “DISP&ILLUMI” > “Contrast”
Press the [ ] button to return to the previous item.
⁄
•Clicking Refer near the description of an operational procedure displays this page, allowing you to confirm how to use the Control knob.
3Set the Contrast function
Turn the Control knob to select a value (1 - 30), and then press the Control knob.
The previous item is displayed.
4Exit the Function setting mode
Press and hold the [ ] button.
About the notation “Contents ”
Clicking “Contents” shown at the upper left of each page allows you to jump to the contents page.