Kenwood KDC-400U Information display setting, Illumination color selection, Display & Illumination setting, the, the, the, knob, Exit, knob, Part, Exit, knob, Exit, Display

Display settings

Contents

Information display setting

You can set the side and graphic parts of the display.

1Enter the Function setting mode Press and hold the Control knob.

2Select the Display select item

Select the following items using the Control

knob. 

“Settings” > “DISP&ILLUMI” > “Display Select”3Select a desired Information display setting item

Turn the Control knob to select a display setting item, and then press the Control knob.

Display		Description
“Display Select”
	“Side Select”	Sets the side part display for Type A, B, and D.
		1 / 2 / 3 (Type A, B only)
	“Graphic Select”	Sets the Type C clock display.
		1 / 2
	“Status”	Sets the status display (ON/OFF indicator for
		each function) for Type A and B.
		“ON” / “OFF”
		(	: Factory setting)

4Select a setting and determine it

Turn the Control knob to select a desired setting, and then press the Control knob. The previous item is displayed.

5Exit the Function setting mode

Press and hold the [   ] button.

Illumination color selection

You can select the illumination color of the panel.

1Enter the Function setting mode Press and hold the Control knob.

2Select the Color select item

Select the following items using the Control

knob. 

“Settings” > “DISP&ILLUMI” > “Color Select”3Select the part for which you want to set the illumination color

Display		Part
“Color Select”
	“Color SEL All”	All
	“Color SEL Display”	Display
	“Color SEL Key”	Button
	“Color SEL USB&AUX”	USB terminal and Auxiliary input

Turn the Control knob to select a part, and then press the Control knob.4Select an illumination colorTurn the Control knob to select a color, and then press the Control knob.

Select a color from “Variable Scan”/ “Color1” — “Color24”.

Adjusting the RGB values

In this step, you can also create your original color during the selection from “Color1” — “Color24”. The color you created can be called by selecting “User”.

1.Press and hold the Control knob. Enter the Detail color adjustment mode.

2.Set the color.

Operation type	Operation
To select the color to adjust	Push the Control knob rightward or
(Red, Green, or Blue)	leftward.
To adjust color	Turn the Control knob.
(Range: 0 – 9)

3.Press the Control knob.

Exit the Detail color adjustment mode.

5Exit the Function setting mode

Press and hold the [   ] button.

Display & Illumination setting

You can set the display and illumination.

1Enter the Function setting mode Press and hold the Control knob.

2Select the Display & Illumination setting item

Select the following items using the Control

knob. 

“Settings” > “DISP&ILLUMI”3Select a desired Display & Illumination setting item

Turn the Control knob to select a Display & Illumination setting item, and then press the Control knob.

Display		Description
“DISP&ILLUMI”
	“DISP ILLUMI OFF”	When “Type E” (Display off) is selected in
		<Selecting a display type> (page 24), sets
		whether to turn off the display only or both the
		display and key illumination.
		“DISP&ILLUMI” / “DISP”
	“Display Dimmer”	Dims the display part in conjunction with the
		Light switch of the vehicle.
		“Auto”: Dims the display in conjunction with
		the Light switch of the vehicle.
		“Manual1”: Dims the display constantly.
		“Manual2”: Dims the display darker than that
		in the Manual1 mode.
		“OFF”: Does not dim the display.
	“Contrast”	Sets the display contrast.
		“1” – ”10” – “30”
	“DISP NEGA/POSI”	Switches the panel display between positive
		and negative modes.
		“NEGA1”: Displays the text in the negative
		mode.
		“NEGA2”: When the interior light is off, the
		text is displayed in the negative
		mode; when the interior light is on,
		the text is displayed in the positive
		mode.
		“POSI1”: Displays the text in the positive
		mode.
		“POSI2”: When the interior light is off, the text
		is displayed in the positive mode;
		when the interior light is on, the text
		is displayed in the negative mode.
	“Text Scroll”	Sets the method of scrolling to view hidden
		texts.
		“Auto” : Scrolls.
		“Once” : Scrolls once.
		“OFF” : Does not scroll.

“ILLUMI Dimmer”	Reduces the key Illumination brightness.
	“Auto”: Dims the illumination in conjunction
	with the Light switch of the vehicle.
	“Manual1”: Dims the illumination constantly.
	“Manual2”: Dims the illumination darker than
	that in the Manual1 mode.
	“OFF”: Does not dim the illumination.
“ILLUMI Effect”	Sets whether the key illumination is changed
	in conjunction with the key operation.
	“ON” / “OFF”
	(	: Factory setting)

4Determine the Display & Illumination setting Turn the Control knob to select a desired setting, and then press the Control knob.

The previous item is displayed.

5Exit the Function setting mode

Press and hold the [   ] button.

26 KDC-400U English 27