General operation

Contents

Auxiliary input display setting

You can set the display when switched the AUX source.

1Select the AUX source Press the [SRC] button. Select the “AUX” display.

2Enter the Function setting mode Press and hold the Control knob.

3Select the AUX name set item

Select the following items using the Control

knob. 

“Settings” > “AUX Name Set”4Select the display connected as an AUX source and determine it

Turn the Control knob to select the Auxiliary input display, and then press the Control knob. Select “AUX”, “DVD”, “PORTABLE”, “GAME”, “VIDEO”, or “TV”.

5Exit the Function setting mode

Press and hold the [   ] button.

Muting the audio upon reception of a phone call

The audio system automatically mutes when it receives an incoming call.

When a call comes in

“CALL” is displayed.

The audio system pauses.

Listening to the audio during a call

Press the [SRC] button.

The “CALL” display disappears and the audio system comes back ON.

When the call endsHang up the phone.

The “CALL” display disappears and the audio system comes back ON.

⁄

•To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to <Connecting wires to terminals> (page 12) in Quick start guide.

Initial settings

You can configure initial settings of this unit.

1Select the Standby Press the [SRC] button. Select the “STANDBY” display.

2Enter the Function setting mode Press and hold the Control knob.

3Select the Initial settings item

Turn the Control knob to select “Initial Settings”, and then press the Control knob.

4Select a desired Initial setting item

Turn the Control knob to select an Initial setting item, and then press the Control knob.

Display

Description

“Initial Settings”

 

 

“SRC Select”

Select “2” to change the source selection

 

 

method. Press the [SRC] button, turn the

 

 

Control knob to select the source, and then

 

 

press the Control knob to determine it.

 

 

1 / 2

 

“Key Beep”

Setting the operation check sound (beep

 

 

sound) ON/OFF.

 

 

“ON” / “OFF”

“Function Language” Changes the display language of items displayed in the Function setting mode. “English” / “Français” / “Español”

“Built-in AUX”

Sets whether to display AUX during source

 

selection.

 

“ON” / “OFF”

“CD Read”

Sets the method for reading CD.

 

When unable to play a special format CD, set

 

this setting to “2” to force playing. Note that

 

some music CDs may be unplayable even

 

when set to “2”.

 

In addition, audio files cannot be played when

 

set to “2”. Normally, keep this set to “1”.

 

1: Automatically distinguishes between the

 

audio file disc and music CD when playing

 

a disc.

 

2: Forces playing as a music CD.

“Built-in AMP”

Selecting “OFF” turns off the built-in amplifier.

 

Turning off the built-in amplifier improves the

 

quality of the sound from Preout.

 

“ON” / “OFF”

“Speaker Select”

Sets the speaker type so that the System Q

 

value is optimal.

 

“OFF”: OFF

 

“5/4inch”: For 5 & 4 in. speaker

 

“6x9/6inch”: For 6 & 6x9 in. speaker

 

“O.E.M.”: For the OEM speaker

 

“F/W Update”

Upgrades the firmware.

 

 

 

 

Selecting “YES” and then pressing the Control

 

 

knob starts upgrading the firmware.

 

 

For how to update the firmware, access our

 

 

web site.

 

 

 

 

http://www.kenwood.com/cs/ce/

 

 

(

 

: Factory setting)

5Select an Initial setting and determine it

Turn the Control knob to select desired setting, and then press the Control knob.

The previous item is displayed.

6Exit the Function setting mode

Press and hold the [   ] button.

30 KDC-400U

English 31