Basic Operations
[ ] Release [SRC] | [DISP] | Disc slot | [] USB Terminal |
[ ] [BAND] [VOL] [] [D] [1][2] [3][4] [5][6] | Auxiliary input |
Before Using
Exit of the Demonstration Mode
Turn off the demonstration mode when you use it for the first time after installation.
1Press the [VOL] knob to quit the demonstration mode when the messages “CANCEL DEMO”, “PRESS”, “VOLUME KNOB” are displayed (approx. 15 seconds).
2Select “YES” and press the [VOL] knob. When “NO” is selected, turn the [VOL] knob.
⁄
•Demonstration mode can also be cancelled in “DEMO MODE” of <Function Setting> (page 8).
Adjusting the Clock
Common Operation
Power and source select
Turns the power ON by pressing the [SRC] button.
When power is ON, pressing the [SRC] button switches among playable sources in the following order:
Tuner (“TUNER”) ➜ USB (“USB”) or iPod (“iPod”)
➜CD (“CD”) ➜ Auxiliary Input (“AUX”) ➜ Standby (“STANDBY”) ➜ Tuner (“TUNER”)
Keeping pressing the [SRC] button for at least 1
second turns the power OFF.
⁄
•The source “iPod” and “CD” can be selected when each source is ready to play.
1Press the [DISP] button several times until clock display (“CLOCK”) appears.
2Keep pressing the [DISP] button until the hour display blinks.
3Turn the [VOL] knob to adjust the hour.
4Press the [VOL] knob to finish the hour adjusting. The minute display blinks.
5Turn the [VOL] knob to adjust the minute.
6Press the [VOL] knob to finish the minute adjusting.
Volume
Turning the [VOL] knob adjusts the sound volume.
Clock display and Display scroll
Pressing the [DISP] button selects the display mode.
Refer to <Text Display Selection> (page 7). Keeping pressing the [DISP] button scrolls the display.
⁄
•You can do this adjustment when “TIME SYNC” in <Function Setting> (page 8) is set to “OFF”.
Auxiliary input
Portable audio device can be connected with the stereo
4