Function Setting

Perform configuration for this unit. You can set up the following functions.

⁄

•You can do this adjustment when “TIME SYNC” is set to “OFF”.

1Select a source

Press the [SRC] button.

Items to be displayed vary depending on the selected source. Refer to the function list shown later.

2Enter Function Setting mode Press the [VOL] button. “FUNCTION” is displayed.3Select the Function item

Turn the [VOL] knob to display your desired item, and then press the [VOL] knob. Repeat the above operation to select the function item to set.

Pressing the [ ] button allows you to go back to the previous item.4Set the Function item

Turn the [VOL] knob to select your desired setting, and then press the [VOL] knob.

5Exit Function Setting mode

Press the [

] button for at least 1 second.
øSynchronize the clock: “TIME SYNC” ➤

“ON”*,”OFF”

Synchronizing the RDS station time data and this unit’s clock.

πDimmer: “DIMMER SET” ➤ “ON”,”OFF”*

Adjusts the brightness of the display according to the surrounding illumination.

[Text Scroll: “TEXT SCROLL” ➤ “AUTO”, ”MANUAL”*

Scrolls the text display of CD, audio file and Radio text.

Selecting AUTO scrolls them automatically.

“Local Seek: “LOCAL SEEK” ➤ “ON”,”OFF”* Only stations whose reception is good are searched in auto seek tuning. (FM only)

]Seek Mode: “SEEK MODE” ➤ “AUTO1”*,”AUTO2”,”MANUAL” Selects the tuning mode of the radio.

Tuning mode

 

Display

 

Operation

Auto seek

 

“AUTO1”

 

Automatic search for a station.

Preset station seek

 

“AUTO2”

 

Search in order of the stations in

 

 

 

 

the Preset memory.

Manual

 

“MANUAL”

 

Normal manual tuning control.

Function item

Legend :No. Function name: “Function name displayed on

this unit” ➤ “Setting 1”*, “Setting 2”...

The function related to the selected function item is described. For where it appears, refer to the No. given in the function list.

⁄

•The setting marked with * is a factory setting.

•The function marked with *1 is supported only by the KDC-4547U.

•The function marked with *2 is supported only by the KDC-4547U/ KDC-4047U/ KDC-4047UM/ KDC-414U/ KDC-414UM.

<SETTINGS>¥Clock Adjust: “CLOCK ADJ”/“CLOCK ADJUST” Sets the clock

1.Turn the [VOL] knob to adjust the hour.

2.Press the [VOL] knob to finish the hour adjusting. The minute display blinks.

3.Turn the [VOL] knob to adjust the minute.

4.Press the [VOL] knob to finish the minute adjusting.

‘Auto Memory: “AUTO MEMORY” Memorizes six stations with good reception automatically.

Selecting “YES” and then pressing the [VOL] knob starts the auto memory operation.

⁄

•This setting can be made when “TYPE NORM”/“TYPE NORMAL” is selected for the <Mixed Preset Memory Switching> item.

\Monaural Reception: “MONO SET” ➤

“ON”,”OFF”*

You can reduce the noise when stereo broadcasts are received as monaural. (FM only)

«News: “NEWS SET” ➤ “OFF”*,”0”-”90” Automatically receives news bulletin when it starts. Set the time during which interrupt is to be disabled after start of another news bulletin. Changing “NEWS 00M” to “NEWS 90M” turns this function ON.

If news bulletin starts when this function is ON, “NEWS” is displayed and news is received. If “20M” is has been set, reception of another news bulletin will not start for 20 minutes.

The news bulletin volume is the same level that was set for Traffic Information.

8 KDC-4547U/ KDC-4047U/ KDC-4047UGY/ KDC-4047UM/ KDC-414UM/ KDC-414U