Other features

English

Audio Control Setting

Adjust various parameters of sound quality.

1Press the AUD button to enter the control mode.

2Press either the FM or AM button.

Each time the button is pressed, the adjustment mode will change as follows:

Pressing the FM button advances the display, and pressing the AM button reverses it.

BassFader

TrebleBalance

NOTE Source tone memory

Each source (CD, FM and AM) has its own memory in which to store the bass and treble tone settings.

The settings made for a particular source are then recalled automatically whenever you use that source (e.g., FM mode uses the tone settings made for FM, AM for AM, etc.).

3Press the 4/¢ button.

Look at the table to adjust the mode being displayed.

Adjustment

Operation of Audio control button

mode

 

 

(Display)

4 button

¢ button

Bass ("BAS")

Bass decreased.

Bass increased.

 

 

 

Treble("TRE")

Treble decreased.

Treble increased.

 

 

 

Balance("BAL")

Left channel emphasized.

Right channel emphasized.

 

 

 

Fader ("FAD")

Rear channel increased.

Front channel increased.

 

 

 

4Press the AUD button to end the control mode.

Clock display

Turning clock display On/Off:

Each time you press the CLK button, the display switches between the clock and each mode display.

TEL Mute

Shut down the audio system temporarily whenever an incoming call is received.

NOTE

The function will not work if a cable is not connected to the car phone.

When the telephone rings:

When a call is received, "CALL" is displayed and all the unit functions are temporarily interrupted.

Restoring Original Unit Source During Phone Call: Press the SRC button.

"CALL" disappears from the display, and the volume of the original source is restored gradually.

Turning TEL Mute Function Off After Phone Call: Hang the phone up.

"CALL" disappears from the display.

The original source (i.e., the one used before the phone call) is returned to automatically, and the volume restored gradually.

Touch Sensor Tone

This function produces a beep sound that accompanies button operation. It can be switched on or off.

Turning the Beep On/Off:

1Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

— 20 —