2Press the ¢ button repeatedly until the Touch Sensor Tone function appears in the display.

Press the 4 button to search in the other direction.

The function setting is indicated by "BEEP ON" or "BEEP OFF" in the display, indicating that the current beep setting is on or off, respectively.

3Switching settings

Press either the AM or FM button. The display and setting will change.

4Press the MENU button to end the menu mode.

NOTE

The beep sound is not output from the preout jacks.

Adjusting Time

With automatic time adjustment, you can set the clock time automatically according to time data sent from RDS stations (after receiving RDS signals for several minutes). You can also set the time manually if the automatic time adjustment function is turned off. The factory default is automatic time adjustment.

Adjusting Time Automatically:

Tune into an RDS station for 3 or 4 minutes.

The time adjusts automatically to the correct local time.

NOTE

The time is not adjusted when the RDS station you are tuned to is not transmitting a time signal. Choose another RDS station in such a case.

Turning Automatic Time Adjustment On/Off:

1Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

2Press the ¢ button repeatedly until the Automatic Time Adjustment function appears in the display.

Press the 4 button to search in the other direction.

The function setting is indicated by "SYNC ON" or "SYNC OFF" in the display, indicating that the Automatic Time Adjustment is

on or off, respectively.

"SYNC ON" (Automatic time adjustment) "SYNC OFF" (Manual time adjustment)

3Switching settings

Press either the AM button or FM button. The display and setting will change.

4Press the MENU button to end the menu mode.

Adjusting Time Manually:

1Turn off the Automatic Time Adjustment as mentioned above.

2Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

3Press the ¢ button repeatedly until the "CLK ADJ" appears in the display.

Press the 4 button to search in the other direction.

4Hold down either the AM or FM button for two seconds or more to enter the Time Adjustment mode.

The hour display will blink.

5• Adjusting the hours

Press the FM button to advance the hours, or press the AM button to make the hours go back.

•Adjusting the minutes

Press the ¢ button to advance the minutes, or press the 4 button to make the minutes go back.

6Press the MENU button to end the menu mode.

— 21 —