Menu System

To accommodate a greater number of functions, a menu system has been employed for making settings. Press the MENU button to enter the menu mode and then display the function to make the setting. Details on each setting are explained separately in the corresponding function page.

1Hold down the MENU button for one second or more. "MENU" is displayed when the menu mode is entered.

The function that you can adjust is indicated with the current settings displayed.

2Selecting function to set

Press the ¢ button to search through the functions until you see the one you want to adjust in the display.

Press the 4 button to search through the functions backward.

Example: If you want to switch the tuning mode from manual to automatic, first search through the functions until you see "MANUAL" in the display.

3Changing setting for currently displayed function Press either the AM or FM button.

The setting will change for each function.

Example: The tuning mode will switch from manual to automatic, and "AUTO" is displayed.

4Ending the menu mode Press the MENU button. The selection includes:

Touch Sensor Tone (BEEP ON / OFF) ➞ Time Adjustment*1 <Manual> (CLK ADJ*2) ➞ Automatic Time Adjustment (SYNC ON / OFF) ➞ Disabled System Indicator (DSI ON / OFF) ➞ News Bulletin Function (NEWS OFF / ##M) ➞ Local seek*3 (LO.S OFF / ON) ➞ Selecting Tuning Mode*3 (AUTO /

MANUAL) ➞ Auto Memory Entry*3 (A-MEMORY (start)) ➞ AF Function*4 (AF ON / OFF) ➞ Region Restrict Function*4 (REG ON / OFF) ➞ Auto TP Seek*4 (ATPS ON / OFF) ➞ Monaural Reception*5 (MONO OFF / ON) ➞ Touch Sensor Tone

*1 When Automatic Time Adjustment is off *2 Time adjustment mode entered

*3 In Tuner mode

*4 Except in AM band

*5 In FM reception of Tuner mode

NOTE

•Make sure to end the menu mode when finished.

If you fail to end the menu mode, several functions may not operate properly, including the Traffic Information function, the News Bulletin function with PTY news timeout setting, and the Alarm function.

•The News function turns on when the setting is made for the news interruption interval. The "##M" display indicates the setting selected for the news interruption timeout interval.

Attenuator

This function allows you to turn down the volume quickly.

Turning Attenuator On/Off:

Press the ATT button to switch the attenuator on and off. When the attenuator is on, the ATT indicator blinks.

When the attenuator is off, the volume returns to the original level.

NOTE

Turning down the volume all the way turns off the attenuator function.

— 7 —