Preparation
How to attach/detach the faceplate
1
1
2
2
Do not expose the faceplate to direct sunlight, excessive heat, or humidity. Also avoid places with too much dust or the possibility of water splashing.
Keep the faceplate in its casing while detached.
The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.
To prevent deterioration, do not touch the terminals of the unit and faceplate with your fingers.
How to reset your unit
If this unit fails to operate properly, press the reset button.
The unit returns to factory settings when the reset button is pressed.
Reset button
Initial settings before operations
1Press SRC to enter [STANDBY] mode.
2 Press the volume knob to enter [FUNCTION] mode.
3 Turn the volume knob to select [INITIAL SET], then press to enter.
4 Turn the vol me knob to make a selection, then press to confirm. See table below for selection.
5 Hold to finish the procedure.
Item | Selectable setting (Preset: *) |
PRESET TYPE | NORMAL/ NORM*: Memorizes ne stati n f r each preset button in each band (FM1/ FM2/ FM3/ MW/ |
| LW). ; MIX: Memorizes one station for ea h preset button regardless of the selected band (FM1/ FM2/ |
| FM3/ MW/ LW). |
KEY BEEP | ON*/ OFF: Activates/deactivates the keypress tone. |
RUSSIAN SET | ON: Folder name, file name, song title, artist name, album name are displayed in Russian (if applicable). ; |
| OFF*: Cancels. |
| Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery. |
|
|
| ON1*: Outputs sound of the connected external component through the car speakers when “AUX” is |
BUILTIN AUX | selected as the source. ; ON2: Outputs sound from the connected external component when “AUX” is |
| selected as the source. When you turn on the power, the sound attenuates (to prevent noise when no |
| external component is connected). Turn the volume knob clockwise to return to the previous volume level. ; |
| OFF: Disables “AUX” in source selection. |
CD READ | 1*: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as a music CD. No |
| sound can be heard if an audio file disc is played. |
SWITCH PREOUT/ | REAR*/ |
SWITCH PRE | the rear of the unit (through an external amplifier). |
SP SELECT | OFF*/ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance. |
F/W UP xx.xx | YES: Starts upgrading the firmware. ; NO*: Cancels (upgrading is not activated). |
| For details on how to update the firmware, see: www.kenwood.com/cs/ce/ |
[SWITCH PREOUT/ SWITCH PRE] is selectable only with
4 | Autogood products Internet store “130” |