Kenwood KDC-5051U, KDC-5751SD, KDC-BT51U Display, Display, Display, Overview, Information, Information, 4Select the text, Turn the Control knob, Exit Function setting mode

In Bluetooth Audio “BT AUDIO EXT” (Optional accessory KCA-BT200, KCA-BT300) source

Information	Display
Source name	“Source Name”
Spectrum analyzer & Clock	“Speana/Clock”
Date	“Date”
Title & Artist name (KCA-BT300 only)	“Title/Artist”
Album & Artist name (KCA-BT300 only)	“Album/Artist”
Blank	“Blank”

1Enter Function setting mode

Press the Control knob for at least 1 second.

2Select Text display selection mode

The item can be selected and determined as follows.

“Settings” > “DISP&ILLUMI” > “Display Select” > “Text Select”

To select the item, turn the Control knob. To determine the item, press the Control knob.

3Select the text display part

Push the Control knob towards up or down. The selected text display part blinks.

4Select the text

Turn the Control knob.

5Exit Function setting mode

Press the [] button for at least 1 second.

⁄

•If the selected display item does not have any information, alternative information is displayed.

•Setting is available when the Display type is A or B which allows text display. Refer to <Selecting display type> (page 24).

•Some items cannot be selected depending on the display type and row.

•When selecting “Folder name” while playing with iPod, names will be displayed depending on currently selected browsing items.

•If the iPod Control by Hand Mode is set to on while playing the iPod, “iPod by Hand Mode” is displayed.

•If all characters cannot be displayed while playing with iPod, the file number in the list is displayed.

Information	Display
Music title	“TITLE***”
Folder name	“FLD***”
File name	“FILE***”

Information display setting

Sets side and graphic parts of the display.

1Enter Function setting mode

Press the Control knob for at least 1 second.

2Select the Display select mode

The item can be selected and determined as follows.

“Settings” > “DISP&ILLUMI” > “Display Select” To select the item, turn the Control knob. To determine the item, press the Control knob.

3Select the desired Information display setting item

Turn the Control knob to select Display setting item, and then press the Control knob.

Display		Overview
“Display Select”
	“Side Select”	Sets the side part display for Type A, B, and D.
		1 / 2 / 3
	“Graphic Select”	Sets the Type C clock display and Type D
		spectrum analyzer display.
		1 / 2
	“Status”	Sets the status display (ON/OFF indicator for
		each function) for Type A and B.
		“ON” / “OFF”
		(	: Factory setting)

4Set the Display setting item

Turn the Control knob to select desired value, and then press the Control knob.

The previous item is displayed.

5Exit Function setting mode

Press the [ ] button for at least 1 second.

English 25