Function of KDC-BT51U, KCA-BT300/BT200 (Optional Accessory)

Bluetooth setup

Downloading the Phone book

Download the phone book data from the cell- phone to this unit so that you can use the Phone Book of this unit.

Downloading automatically

If the cell-phone supports a phone book synchronization function, the phone book is downloaded automatically after Bluetooth connection.

Selecting the Bluetooth device you wish to connect

When two or more Bluetooth devices have already been registered, you need to select the Bluetooth device you wish to use.

1Enter Bluetooth mode

 KDC-BT51U 

Press the [

] button.

 KDC-5751SD  KDC-5051U 

⁄

•Setting on the cell-phone may be required.

•If no phone book data is found in the unit even after the “Completed” is displayed, your cell-phone may not support automatic download of phone book data. In this case, try downloading manually.

Downloading from the cell-phone manually1Operate the cell-phone to end the hands-free connection.2Operate the cell-phone to send the phone book data to this unit

By operating the cell-phone, download the phone book data to this unit.

•During downloading: “Downloading” is displayed.

•After completion of downloading: “Completed” is displayed.

3Operate the cell-phone to start the hands-free connection.Clearing the downloading completion message Press any button.

⁄

•Up to 1000 phone numbers can be registered for each registered cell-phone.

•Up to 32 digits can be registered for each phone number along with up to 50* characters representing a name.

(* 50: Number of alphabetic alphabetical characters. Fewer characters can be input depending on the type of characters.)

•To cancel downloading of the phone book data, operate the cell-phone.

Press the [LOG] button for at least 1 second.

“BT MODE” is displayed.

2Enter Function setting mode

Press the Control knob for at least 1 second.

3Select Bluetooth device selection mode The item can be selected and determined as follows.

“Settings” > “Pairing” > “Phone Selection” (to select the cell-phone) or “Audio Selection” (to select the audio player)

To select the item, turn the Control knob. To determine the item, press the Control knob. “(name)” is displayed.

4Select a desired Bluetooth device

Turn the Control knob to select Bluetooth device name, and then press the Control knob. ‘✱(name)’ or ‘-(name)’ is displayed.

“✱”: The selected Bluetooth device is busy.

“-”: The selected Bluetooth device is on standby.

“ “ (blank): The Bluetooth device is deselected.

5Exit Bluetooth mode Press the [SRC] button.

⁄

•If a cell-phone is already selected, deselect it, and then select a different one.

•If you cannot select a device using the audio player, connect the device with the audio player.

46KDC-BT51U/ KDC-5751SD/ KDC-5051U