Manuals / Brands / Car Audio and Video / Car Stereo System / Kenwood / Car Audio and Video / Car Stereo System

Kenwood KDC-5090R, KDC-6090R, KDC-V6090R Display and setting:, Display and setting:, Display and setting:, Display and setting:, Manual Time Adjustment, Selectable Illumination

1 44

Download 44 pages, 872.99 Kb

Menu settings

English

Manual Time Adjustment

Adjust the time manually.

NOTE

This adjustment is available only when the automatic time adjustment is set to off. (page 30)

Display and setting:

1Select the display "Clock Adjust" during the selecting function in the menu system.

2Hold down either the 4 or ¢ button for one second or more to enter the Manual time adjustment mode.

The time display will blink.

3• Adjusting the hours

Press the FM button to advance the hours, or press the AM button to make the hours go back.

•Adjusting the minutes

Press the ¢ button to advance the minutes, or press the 4 button to make the minutes go back.

4Press the MENU button to end the Manual Time Adjustment mode.

Exiting the Manual Time Adjustment mode would start the clock counting.

Automatic Time Adjustment

With automatic time adjustment, you can set the clock time automatically according to time data sent from RDS stations (after receiving RDS signals for several minutes). You can also set the time manually if the automatic time adjustment function is turned off.

Display and setting:

"SYNC ON" : Automatic time adjustment (Default setting)

"SYNC OFF" : Manual time adjustment

Adjusting Time Automatically:

Tune into an RDS station for 3 or 4 minutes.

The time adjusts automatically to the correct local time.

NOTE

The time is not adjusted when the RDS station you are tuned to is not transmitting a time signal. Choose another RDS station in such a case.

Selectable Illumination

You can switch the colour of the button illumination between green and red.

Display and setting:

"Button Green" : The colour of the illumination is green.

"Button Red" : The colour of the illumination is red.

Switching Graphic Display

This function allows you to turn off the lower part of the display if there is too much information in the display.

Display and setting:

"Graphic ON" : The display will turn on by using the whole part of the display. (Default setting)

"Graphic OFF" : The display will turn on by using only the upper part of the display and the IN indicator.

— 30 —

Contents

B64-1873-00(EN) English Safety precautions General features Audio control features Tuner features 2WARNING2CAUTION IMPORTANT INFORMATION About the disc changer to be To prevent injury and/or fire, take the following precautions: When extending the ignition, battery or ground cables, make sure to use •Make sure not to get your fingers caught between the faceplate and the unit Reset button Cleaning the Faceplate Terminals Cleaning the CD Slot The marking of products using lasers (Except for some areas) Lens Fogging Handling CDs •Do not stick tape on either side of the CD Storing CDs Cleaning CDs Checking New CDs for Burrs Do Not Load CD Accessories in Slot Removing the CD Do Not Use Special Shape CDs Do Not Use CDs with Sticker on the Labelled Side button KDC-6090R/KDC-5090R KDC-V6090R Power Turning on the power: Volume Increasing Volume: Decreasing Volume: Attenuator Turning Attenuator On/Off: Theft Deterrent Faceplate Removing the Faceplate: Reattaching the Faceplate: Hiding the control panel: Opening the control panel: Clock display Changing the Clock Display: TEL Mute When the telephone rings: Restoring Original Unit Source During Phone Call: Press the SRC button Switching the Preset Sound Setting: Non-FadingOutput Turning non-fadingoutput On/Off : Speaker Setting Audio Control Setting 2Selecting mode 3Adjust each mode Bass Level Display and setting: Middle Level Display and setting: "Middle"/"MID" : - 8 – + Treble Level Low-passFilter Frequency for Non-FadingOutput Phase for Non-FadingOutput Volume Offset Tuning Station Preset Memory Recalling a Preset Station: Switching Display for Tuner Switching the Display: To prevent accidents, drivers should not look at the display whilst driving RDS indicator RDS (Radio Data System) Traffic Information Function Turning TI function On/Off: Enhanced Other Network Alarm Presetting Volume for Traffic Information/News Radio Text Scroll To scroll manually: To scroll automatically: Programme Type (PTY) Function 2Select the type of programme to be received 3Seeking the selected programme type Switching to Other Stations with the Same Type of Programme: Cancelling Programme Type Function During Its Operation: Changing Language for Programme Type(PTY) Function 2Enter the Changing Language Mode Playing CDs Playing CDs: Playing CDs Already Inserted: Pausing and Restarting CD Play: Eject: Fast Forwarding and Reversing Disc Play Fast Forwarding Disc Play: Reversing Disc Play: Track Search Making a Reverse Track Search: Track / Disc Repeat Turning Repeat Play Function On/Off: Random Play Track Scan Starting the Track Scan: Switching Display for Discs Switching Display for Discs: Text / Title Scroll Presetting Disc Names (DNPS) Page Menu System 1Enter the menu mode 2Selecting function to set Changing setting for currently displayed function 4Ending the menu mode Press the MENU button If you press the RESET button or remove the battery: Touch Sensor Tone Manual Time Adjustment Automatic Time Adjustment Adjusting Time Automatically: Selectable Illumination Switching Graphic Display Variable Illumination Colour Setting 2To set a colour manually: 3To make the popular colours appear: 4To switch colours depending on the situation: (Situational Mode) 5To finely adjust blue: (Blue Adjust Mode) Switching preout External Amp Control News Bulletin Function with PTY News Timeout Setting Local Seek Function <In Tuner mode Selecting Tuning Mode <In Tuner mode Cancelling Auto Memory Entry During Its Operation: Auto Memory Entry <In Tuner mode AF (Alternative Frequency) Function Auto TP Seek Function Restricting RDS Region (Region Restrict Function) Monaural Reception <In FM reception of Tuner mode Power OFF Timer Accessories External view Number of items Installation Procedure Connecting Cables to Terminals Connector Function Guide Cable Colour Functions External Power Connecting the ISO Connector (see p.37) ■Installation (Default setting) The Unit Vehicle ■Removing the hard rubber frame ■Removing the Unit ■Locking the faceplate to the unit Troubleshooting Guide PROBLEM POSSIBLE CAUSE SOLUTION CD/External disc control mode Eject NO DISC TOC Error ]Load the disc magazine properly. No CD in the unit ]Insert the CD Specifications Specifications subject to change without notice FM tuner section Frequency range (50 kHz space) 87.5 MHz – 108.0 MHz