Function of the KDC-V6090R

Variable Illumination Colour Setting

You can set the display to a desired colour.

Display and setting:

1Select the display "Color" during the selecting function in the menu mode.

2To set a colour manually:

Hold down on the 4 or ¢ button.

Pressing the ¢ button advances the colour, and pressing the 4 button reverses it.

When the desirable colour appears, release the button.

3To make the popular colours appear:

Press the preset button(#1-4) for the desired color.

The buttons #1-4 are preset for the following four colours: #1: White

#2: Red

#3: Blue

#4: Blue Green

4To switch colours depending on the situation: (Situational Mode)

Each time you press the #6 button, the mode switches as follows:

▼

Scan Mode

▼

SRC Mode

(Changing colours depending on the source being played)

▼

Time Mode

(Colour changes every six hours)

▼

Situational Mode off

When the Situational Mode is off, the original colour setting resumes.

5To finely adjust blue: (Blue Adjust Mode)

Press the #3 button for two seconds or more to enter the blue adjust mode.

The 4 and ¢ buttons are used to adjust the blue color tones, respectively.

Press the #3 button to end the blue adjust mode.

6To store the colour setting in the memory: (colour preset memory)

After adjusting the illumination colours, press the #5 button for two seconds to store the colour setting in the memory. Pressing the #5 button again recalls the stored colours from the memory.

NOTE

The Blue Adjust mode setting cannot be stored in memory.

7Press the MENU button to end the Variable Illumination Colour Setting mode.

Contrast Adjustment

This adjustment permits easy viewing of the display.

Display and setting: "Contrast 0" – "Contrast 10"

NOTE

The initial setting value is "5".

Dimmer

You can dim the display.

NOTE

The dimmer function is not available for units if the dimmer cable is not connected.

Display and setting:

"Dimmer ON" : The dimmer setting is on. (Default setting)

"Dimmer OFF" : The dimmer setting is off.

— 31 —