With the local seek function turned on, auto seek tuning skips stations with relatively poor reception.
Display and setting:
"Local.S ON" : The local seek function is on.
"Local.S OFF" : The local seek function is off. (Default setting)
Selecting Tuning Mode <In Tuner mode>You can choose from three tuning modes: auto seek, preset station seek, and manual. The "AUTO 1" indicator lights up when auto seek tuning is selected, and the "AUTO 2" indicator lights when preset station seek tuning is selected.
Display and setting:
"Auto 1" : Auto seek tuning mode (Default setting)
"Auto 2" : Preset station seek tuning mode
"Manual" : Manual tuning mode
When all the stations in a certain band are stored in the preset memory, the auto memory entry stops. The tuner then plays the last station received.
NOTE
•When the AF function is turned on whilst auto memory entry takes place, only RDS stations (i.e., stations with RDS capability) are stored. RDS stations that have been preset for FM1 cannot also be preset in FM2 or FM3.
•When the local seek function is turned whilst auto memory entry takes place, stations with poor reception are not stored.
•When the Traffic Information function is on, only the local traffic information station frequency will be stored.
Cancelling Auto Memory Entry During Its Operation:Press the 4 / ¢ button whilst auto memory entry is taking place to stop the process.
Recalling a Preset Station:
Press the preset station button
You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to 6 frequencies can be stored this way.
Display and setting:
1Select the display
2Hold down either the 4 or ¢ button for two seconds or more to start auto memory function.
The numbers of the preset station buttons showed in order.
—33 —