the unit, the former will be used.

• This function does not work for call waiting.

•“Bluetooth HF/Audio”  (Setting up the Voice Output Speakers)

Select the speaker which is further from the microphone in order to prevent howling or echoes.

•“BT F/W Update”  (Displaying the Firmware Version) Display the version of the firmware of this unit.

For how to update the firmware, access our web site. http://www.kenwood.com/cs/ce/bt/

Registering Bluetooth device

To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to 5 Bluetooth devices to this unit.

Registering from this unit

1Enter Bluetooth mode

 KDC-BT60U 

Press the [

] button.

 KDC-6047U 

Press the [TI] button for at least 1 second. ✍✍You can also select from “Settings” in Menu List

mode.

2Enter Bluetooth device registration mode Turn the [VOL] knob and press it when the

desired item is displayed.

Select “BT Settings” > “Detailed Setup” > “Device Regist.”.

Search for the Bluetooth device.

When search is completed, “Finished” is displayed.

3Select a Bluetooth device

Turn the [VOL] knob and press it when the desired item is displayed.

4“Paring” is displayed (except KCA-BT200)

If “Pairing Success” is displayed, proceed to step 7. If “PIN Code NG” is displayed, proceed to steps 5 to 6.

5Input the PIN code

Operation type

Operation

Select the numbers.

Turn the [VOL] knob.

Move to the next digit.

Press the [¢] button.

Delete the last digit.

Press the [4] button.

6Transmit the PIN code

Press the [VOL] knob for at least 1 second. If “Pairing Success” is displayed, registration is completed.

✍✍If the error message appears even though the

PIN code is correct, try <Registering Special Bluetooth device>.

7Return to the device list Press the [VOL] knob.

8Exit BT Settings mode

 KDC-BT60U 

Press the [

] button.

 KDC-6047U 

Press the [TI] button for at least 1 second.

⁄

•This unit allows up to eight digits to be input for a PIN code. If a PIN code cannot be input from this unit, it can be input from the Bluetooth device.

•If there are 5 or more Bluetooth devices registered, you cannot register a new Bluetooth device.

Registering Special Bluetooth device

Allow registration of a special device that cannot be registered normally (pairing).

1.Select Special device registration mode Turn the [VOL] knob and press it when the desired item is displayed.

Select “BT Settings” > “Detailed Setup” > “SPCL DVC Select”.

2.Enter Special device registration mode Press the [VOL] knob for at least 1 second. A list is displayed.

3.Select a device name

Turn the [VOL] knob and push the center when the desired device name is displayed.

If “Completed” is displayed, registration is completed.

4.Go through the procedure step 3 of <Registering from this unit> and complete the registration (pairing).

Cancelling Special device registration mode

Press the [MENU] button for at least 1 second.

⁄

• If the device name is not in the list, select “Other Phones”.

English 47