Each time you press the DISP button, the display during disc
play switches as follows:
•You can give names to discs through the presetting disc name
function (page 26). Note that depending on the unit, display
may not be possible.
•If you try to display the name of a disc that does not have one,
"NO NAME" is displayed instead.
•When there is an attempt to display the title of a disc for which
the disc title/track title has not been recorded, "NO TEXT" is
displayed for CD and "NO TITLE/NO NAME" is displayed for
MD.
•If you attempt to display disc title/track title when connecting
the CD changer not supported for CD text feature, caution
messages such as "NO TEXT" or "Reading" may be displayed.
•Depending on the type of characters of the CD Text, some
characters may not be displayable.
NOTE
Track time
Disc name (DNPS) (only when being preset)
Disc title (Units featuring CD text/MD only)
Track title (Units featuring CD text/MD only)
Switch the display that appears while discs are playing.
Switching Display for Discs:
Switching Display for Discs
This function permits the connection of optional players and
the playing of discs other than the loaded CD (in the current
unit).
Playing Discs:
Press the SRC button repeatedly to select the external disc
control mode.
The disc will start playing.
The external disc control mode will differ, depending on the unit
that is connected.
Mode Display Examples
•"CD2" ...when a CD player is connected
•"DISC" ...when a disc changer is connected
•"DISC-1" , "DISC-2" ...when two disc changers are connected
Pausing and Restarting Disc Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
•When one disc has finished playing its last track, the next disc
in the changer will start playing. When the last disc in the
changer has finished, the player will return to the first disc and
start playing it.
•Disc #10 is displayed as "0".
NOTE
NOTE
Playing Other Disc mode
•When you load a CD and eject it right away, the next time you
try to insert the CD may not load. In such a situation, take the
CD out for a moment and then reinsert it.
•While the control panel is sliding, only available buttons are 0,
ATT, ▲, ▼and SRC.
NOTE
— 23 —
(KDC-5018 : Function of disc changers)
(KDC-5018 : Function of disc changers)