Adjust the bass boost level of the external amplifier using the
main unit.
Display and setting:
"AMP Bass FLT" : Bass boost level is flat. (Default setting)
"AMP Bass +6" : Bass boost level is low (+6dB).
"AMP Bass +12" : Bass boost level is high (+12dB).
As of December 2000, the power amplifiers controllable by the
main unit are as follows:
KAC-X501F/PS501F/X401M/PS401M/X301T/PS301T/X201T/PS201T
NOTE
External Amp Control
You can dim the display.
The dimmer function is not available for units if the dimmer wire
is not connected.
Display and setting:
"Dimmer ON" : The dimmer setting is on. (Default setting)
"Dimmer OFF" : The dimmer setting is off.
NOTE
Dimmer
This adjustment permits easy viewing of the display.
Display and setting:
"Contrast 0" – "Contrast 10"
The initial setting value is "5".
NOTE
Contrast Adjustment
To make the popular colors appear:
Press the preset button (#1-4) for the desired color.
The buttons #1-4 is preset for the following four colors:
#1: White
#2: Red
#3: Blue
#4: Blue Green
To switch colors depending on the situation:
(Situational Mode)
Each time you press the #6 button, the mode switches as
follows:
When Situational Mode is off, the original color setting
resumes.
To finely adjust blue: (Blue Adjust Mode)
Press the #3 button for at least two seconds to enter the
blue adjust mode.
The 4and ¢buttons are used to adjust the blue color
tones, respectively.
Press the #3 button to end the blue adjust mode.
To store the color setting in the memory:
(color preset memory)
After adjusting the illumination colors, press the #5 button for
two seconds to store the color setting in the memory.
Pressing the #5 button again recalls the stored colors from the
memory.
The Blue Adjust mode setting cannot be stored in memory.
NOTE
6
5
▼
Scan Mode
▼
SRC Mode
(Changing colors depending on the source being played)
▼
▼
Time Mode
(Color changes every six hours)
Situational Mode off
4
3
— 31 —
Press the MENU button to end the Variable Illumination Color
Setting mode.
7