Kenwood KDC-5018, KDC-7018, KDC-V7018R - page 40

English

— 40 —

Installation

Removing the hard rubber frame

■

When the upper level is removed, remove the lower two

locations.

3

The frame can be removed from the bottom side in the same

manner.

NOTE

Catch

Lock

Refer to the section “Theft deterrent faceplate (P. 10)” and

then remove the faceplate.

Engage the catch pins on the removal tool and remove the

two locks on the upper level.

Push upward the frame and pull it forward as shown in the

figure.

2

1

Accessory3

Removal tool

Accessory6

Removing the Unit

■

Push upward the removal

tool toward the top, and

pull out the unit halfway

whilst pressing towards the

inside.

4

Pull the unit all the way out

with your hands, being

careful not to drop it.

5

Be careful to avoid injury from the catch pins on the removal

tool.

2CAUTION

Catch facing up

Refer to the section “Removing the hard rubber frame” and

then remove the hard rubber frame.

Remove the Hex-head screw with integral washer (M4×8) on

the back panel.

Insert the two removal tools deeply into the slots on each

side, as shown.

3

2

1

Accessory3

Removal tool

Contents

Main Contents Safety precautions General features Audio control features RDS features CLASS 1 LASER PRODUCT Safety precautions NOTE Cleaning the Faceplate Terminals Reset button Safety precautions Cleaning the CD Slot Lens Fogging Page Handling Compact discs Do Not Load CD Accessories Removing the CD Do Not Use Special Shape CDs Do Not Use CDs with Sticker on the Labeled Side Attenuator Power KDC-V7018R Volume KDC-7018/KDC-5018 System Q Switching Modes Loudness Non-Fading Output Speaker Setting TEL Mute Clock display Page Page Audio control features Volume Offset Phase for Non-Fading Output High-pass Filter Frequency for Rear Output Low-pass Filter Frequency for Non-Fading Output High-pass Filter Frequency for Front Output Station Preset Memory Tuning Switching Display for Tuner Presetting Volume for Traffic Information/News RDS (Radio Data System) Enhanced Other Network Alarm Traffic Information Function Page Program Type (PTY) Function Changing Language for Program Type (PTY) Function Auto Memory Entry Tuning Station Preset Memory Frequency Step Setting Switching Display for Tuner Station Name Preset (SNPS) Playing CDs KDC-7018/KDC-5018 KDC-V7018R Switching Display for Discs Playing Other Disc mode Track / Disc Repeat Fast Forwarding and Reversing Disc Play Disc Search (Function of disc changers) Track Search Magazine Random Play (Function of disc changers) Random Play Track Scan Presetting Disc Names (DNPS) Text Scroll Text / Title Scroll Disc Name Preset Play (DNPP) Security Code Menu System KDC-V7018R KDC-7018/KDC-5018 Touch Sensor Tone 7 Variable Illumination Color Setting Manual Time Adjustment Selectable Illumination Automatic Time Adjustment Switching Graphic Display External Amp Control 7 Contrast Adjustment Dimmer Auto Memory Entry <In Tuner mode> Selecting Tuning Mode <In Tuner mode> Local Seek Function News Bulletin Function with PTY News Timeout Setting Auto TP Seek Function Restricting RDS Region (Region Restrict Function) AF (Alternative Frequency) Function Clean Reception System Circuit (CRSC) Basic Operations of remote Text Scroll <In FM or External disc control mode> Text Scroll <In External disc control mode> Monaural Reception Basic operations CD/External disc control features Basic Operations of remote Page Connecting Wires to Terminals Installing in Japanese-Made Cars Page Page Page SOLUTION POSSIBLE CAUSEPROBLEM CD/External disc control mode If the following situations, consult your nearest service center: