Setting the angle or back-forward position of the control panel.
1Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "PNL" is displayed above the [4]
button.
2Enter Panel Position Setting mode
Press the [4] ("PNL") button.
3Select the item for adjustment
Press the desired [2] —[5] button.
Each time the button is pressed the items that can be adjusted
switch as shown below.
Adjustment Item Button Display
The panel tilts upwards [2] "ANG–"
The panel tilts downwards [3] "ANG+"
The panel slides backward [4] "SLD–"
The panel slides forward [5] "SLD+"
4Exit Panel Position Setting mode
Press the [RTN] button.
The control panel may be interfered with the shift lever or another
part depending on the angles of the control panel.
Set the angle to avoid any interference.
No sound is produced while the panel is operating.
Panel Position Setting
Turning the Non-fading output ON or OFF.
Press the [NF] button for at least 1 second.
Each time the button is pressed Non-fading output switches ON
or OFF.
When it’s ON, "NF ON" is displayed.
Non-fading Output
Selecting the display when this device is switched to Auxiliary
input source.
1Select Auxiliary input source
Press the [SRC] button.
Select the "AUX"/"AUX1" display.
2Enter Auxiliary input display setting mode
Press the [NAME.S] button for at least 2 seconds.
The presently selected AUX Name is blinks.
3Select the Auxiliary input display
Press the [4] or [¢] button.
Each time the button is pressed it switches through the below
displays.
• "AUX"/"AUX1"
• "TV"
• "VIDEO"
• "GAME"
• "PORTABLE"
• "DVD"
4Exit Auxiliary input display setting mode
Press the [NAME.S] button.
When operation stops for 10 seconds, the name at that time is
selected, and Auxiliary input display setting mode closes.
Auxiliary Input Display Setting
General features
— 14—
English
When the <Switching preout> (page 30) is "SWPRE Rear", this
function is not available.
KDC-8023_U.S_r2 03.1.8 4:00 PM Page 14