Kenwood KDC-8023 Tuner/TV control features

Changing the tuning frequency step.
Frequency Step Setting
Calling up the stations in the memory.
1Select the band
Press the [FM] or [AM] button.
2Select the key function section
Press the [NEXT] button.
Repeatedly press the button until the function item is not
displayed above the [2] —[5] button.
Refer to <Notes on Multi-function Key System> (page 6).
3Call up the station
Press the desired [1] —[6] button.
Preset Tuning
Putting stations with good reception in the memory
automatically.
1Select the band for Auto Memory Entry
Press the [FM] or [AM] button.
2Open Auto Memory Entry
Press the [AME] button for at least 2 seconds.
When 6 stations that can be received are put in the memory
Auto Memory Entry closes.
Auto Memory Entry
The preset number display blinks 1 time.
On each band, 1 station can be put in the memory on each [1] —
[6] button.
Putting the station in the memory.
1Select the band
Press the [FM] or [AM] button.
2Select the frequency to put in the memory
Press the [4] or [¢] button.
3Select the key function section
Press the [NEXT] button.
Repeatedly press the button until the function item is not
displayed above the [2] —[5] button.
Refer to <Notes on Multi-function Key System> (page 6).
4Put the frequency in the memory
Press the desired [1] — [6] button for at least 2 seconds.
Station Preset Memory
Entering the frequency and tuning.
1Select the band
Press the [FM] or [AM] button.
2Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
"– – – –" is displayed.
3Enter the frequency
Press the number buttons on the remote.
Example:
Desired frequency Press button
92.1 MHz (FM) [0], [9], [2], [1]
810 kHz (AM) [0], [8], [1], [0]
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
Direct Access Tuning (Function of remote)
Tuner/TV control features
— 18—
English
KDC-8023_U.S 02.12.17 6:31 PM Page 18