Kenwood KDC-8023 instruction manual 5, 6, 7

[3] button
Adjustment Item Display Range
Middle level "Middle" –8 — +8
[4] button
Adjustment Item Display Range
Treble level "Treble" –8 — +8
[5] button
Adjustment Item Display Range
Balance "Balance" Left 15 — Right 15
Fader "Fader" Rear 15 — Front 15
1st section
[2] button
Adjustment Item Display Range
Bass level "Bass" –8 — +8
2nd section
Adjustment Item Button Display
High Pass Filter [2] "HPF"
Low Pass Filter* [3] "LPF"
Loudness [4] "LOUD"
Non-Fading* [5] "N-F"
3rd section
Adjustment Item Button Display
Volume offset [2] "VOFF"
5Select the Audio Control item for adjustment
Press the [2] — [5] button.
Each time the [2] —[5] button is pressed the adjustable audio
items are switched among ranges of all stage section's tables on
the following pages.
6Adjust the Audio Control item
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
7Exit Audio Control mode
Press the [RTN] button.
•The loudness setting can also be adjusted by pressing the [4]
button.
•*This mode is available only when <Non-fading Output> (page 14)
is ON.
— 9—
KDC-8023_U.S 02.12.17 6:31 PM Page 9