12 | English
General features
Audio Control1 Select the source for adjustment
Press the [SRC] button.
2 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "AUD" is
displayed above the [2] button.
Refer to 'Notes on Multi-function Key System'
(page 9).
3 Enter Audio Control mode
Press the [2] ("AUD") button.
4 Select the Adjustment item section
Press the [NEXT] button.
Repeatedly press the button until the desired
Adjustment item is displayed above the [2] — [5]
button.
1st section
Adjustment Item Button Display
Bass [2] "BASS"
Middle [3] "MID"
Treble [4] "TRE"
Subwoofer* [5] "SW"
2nd section
Adjustment Item Button Display
High Pass Filter [2] "HPF"
Low Pass Filter* [3] "LPF"
Loudness [4] "LOUD"
Balance & Fader [5] "BL/F"
3rd section
Adjustment Item Button Display
Volume offset [2] "VOFF"
5 Select the Audio Control item for
adjustment
Press the [2] — [5] button.
Each time the [2] — [5] button is pressed the
adjustable audio items are switched among
ranges of all stage section’s tables on the
following pages.
6 Adjust the Audio Control item
Press the [4] or [¢] button.
Each time the button is pressed the setting
switches as shown below.
• The Adjustment item can also be controlled by the
rotary volume knob. Refer to 'Rotary Volume knob
operation mode select'(page 13).
7 Exit Audio Control mode
Press the [6] button.
• The loudness setting can also be adjusted by pressing
the [4] button.
• * This mode is available only when 'Subwoofer Output'
(page 11) is ON.
1st section
[2] button
Adjustment Item Display Range
Bass level "Bass" –8 — +8
[3] button
Adjustment Item Display Range
Middle level "Middle" –8 — +8
[4] button
Adjustment Item Display Range
Treble level "Treble" –8 — +8
[5] button
Adjustment Item Display Range
Subwoofer level "SW Level" –15 — +15