INTEN CE

V-BELTS

Check V-belts for deterioration and wear after every 50 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. (See "TO REMOVE BELT COVER" in the Service and Adjustments section of this manual).

The V-belts on your snow thrower are of special construction and should be replaced by original equipment manufacturer (OEM) belts available from your nearest dealer. Using other than OEM belts can cause personal injury or damage to the snow thrower.

AUGER GEAR CASE

The gear case was filled with lubricant to the proper level at the factory. The only time the lubricant needs attention is if service has been performed on the gear case.

If lubricant is required, use only Ronex ED #1 grease.

TRACTION DRIVE SYSTEM

DO NOT lubricate the drive components inside the snow thrower. The sprockets, hex shafts, drive disc and friction wheel require no lubrication. The bearings and bushings are lifetime lubricated and require no maintenance.

CAUTION: Any lubricating of the above compo- nents can cause contamination of the friction

wheel and damage to the drive system of your snow thrower.

ENGINE

LUBRICATION

Use only high quality detergent oil rated with API service classification SG-SL. Select the oil'sSAE viscosity grade according to your expected operating temperature.

SAE ViSCOSiTY GRADES

 

 

!

 

I

 

i °F

-20

 

0

30 32

40

i°c -30

-2o

40

6

lo

TEMPERATURE RANGE ANTiCiPATED

BEFORE NEXT OiL CHANGE

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°F/0°C. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Change the oil after every 25 hours of operation or at least once a year if the snow thrower is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Tighten oil fill cap / dipstick securely each time you check the oil level.

TO CHANGE ENGINE OIL

Determine temperature range anticipated before next oil change. All oil must meet API service classification SG-SL.

Be sure snow thrower is on level surface.

Oil will drain more freely when warm.

Catch oil in a suitable container.

NOTE: The left side wheel may be removed from snow thrower for easier access to the oil drain plug and place- ment of a suitable container. The unit tilted, resting on the frame with the left wheel removed, will help drain any oil trapped inside the engine. (See "TO REMOVE WHEELS" in the Service and Adjustments section of this manual).

1.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with plug.

2.Clean area around drain plug.

3.Remove drain plug and drain oil in a suitable container.

4.Install drain plug and tighten securely.

5.Wipe off any spilled oil from snow thrower and engine.

6.Install left wheel (if removed for draining oil). Besureto install klick pin into proper hole in wheel axle (See "TO REMOVE WHEELS" in the Service and Adjustments section of this manual).

7.Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine.

8.Refill engine with oil through oil dipstick tube. Pour

slowly. Do not overfill. For approximate capacity see "PRODUCT SPECIFICATIONS" section of this manual.

9.Use gauge on oil fill cap/dipstick for checking level. Be sure dipstick cap is tightened securely for accurate reading. Keep oil at "FULE'line on dipstick.

10.Wipe off any spilled oil.

MUFFLER

Inspect and replace corroded muffler as it could create a fire hazard and/or damage.

SPARK PLUG

Replace spark plug at the beginning of each season or after every 100 hours of operation, whichever occurs first. Spark

plug type and gap setting are shown in the "PRODUCT SPECIFICATIONS" section of this manual.

CLEANING

IMPORTANT." For best performance, keep snow thrower

housing free of any dirt or trash. Clean the outside of your snow thrower after each use.

&WARNING: Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with plug.

eKeep finished surfaces/wheels free of gasoline, oil, etc.

eWe do not recommend using a garden hose to clean your snow thrower unless the electrical system, muffler and carburetor are covered to keep water out. Water in engine can result in shortened engine life.

16

Page 16
Image 16
Craftsman 917.881064 owner manual Inten CE, Engine, Cleaning

917.881064 specifications

The Craftsman 917.881064 is a powerful and versatile riding lawn mower designed for homeowners seeking an effective solution for lawn care. This model is engineered to deliver precision and ease of use, making it an essential tool for maintaining a well-manicured yard.

One of the standout features of the Craftsman 917.881064 is its robust engine. Equipped with a reliable Briggs & Stratton engine, it ensures optimal power and performance. The engine provides a solid horsepower, allowing users to tackle tough mowing jobs with confidence. The automatic transmission enhances the riding experience, enabling smooth acceleration and deceleration, which is particularly beneficial when navigating around gardens and flower beds.

The cutting deck of the Craftsman 917.881064 is another highlight. With a generous cutting width, it allows for efficient mowing of larger areas in less time. It is adjustable, offering multiple cutting height options to customize the finish according to personal preferences. This feature is crucial for achieving the desired lawn appearance and ensuring healthy grass growth.

Technology plays a significant role in the functionality of this mower. The integrated mulching capability enables grass clippings to be finely shredded and returned to the lawn, providing essential nutrients and promoting a healthier turf. Furthermore, the mower features a side-discharge option, giving users flexibility in how they manage clippings.

Durability and comfort are key characteristics of the Craftsman 917.881064. The heavy-duty frame and high-quality materials used in construction ensure it can withstand frequent use in various weather conditions. The plush, adjustable seat offers comfort during longer mowing sessions, making the experience more enjoyable.

Ease of maintenance is another important aspect. The mower is designed for straightforward maintenance procedures, with accessible components that simplify oil changes and blade replacements. This thoughtful design extends product life and enhances performance.

In summary, the Craftsman 917.881064 is a well-rounded riding lawn mower that combines power, efficiency, and comfort. With its sturdy construction, advanced features, and user-friendly technology, it provides an excellent solution for homeowners looking to maintain their lawns with minimal effort. Whether mowing, mulching, or simply enjoying the ride, this mower stands out as a reliable choice in the garden care domain.