Craftsman 917.881064 owner manual E-Operation, See Figs. 3 and

LY /

iNSTALL TRACTION DRIVE CONTROL ROD

(See Figs. 3 and 4)

The traction drive control rod has the long loop on the end of the spring as shown.

1.Slide rubber sleeve up rod and hook end of spring into pivot bracket with loop opening down as shown.

2.With top end of rod positioned under left side of control panel, push rod down and insert top end of rod intohole in drive control bracket. Secure with retainer spring.

DRIVE

BRACKET

FIG. 3

DRIVE RETAINER

SPRING

CONTROL

BRACKET

E-OPERATION

iNSTALL AUGER CONTROL ROD (See Figs. 5 and 6)

The auger control rod has the short loop on the end of the spring as shown.

1.Slide rubber sleeve up rod and hook end of spring into control arm with loop opening up as shown.

2.With top end of rod positioned under right side of control panel, push down on rod and insert end of rod into hole in auger control bracket. Secure with retainer spring.

AUGER

CONTROL

ROD

RUBBER

SLEEVE

CONTROL

ARM

FiG, 5

AUGER CONTROL ROD AUGER

CONTROL

RETAINER LEVER

SPRING

CONTROL

BRACKET

FIG. 4 FIG. 6