16. SiriusXM™
16.1 Before use
SiriusXM Satellite Radio operation requires the connection of the optional SiriusXM Connect Vehicle Tuner. To activate the SiriusXM Vehicle Connect tuner, you will need the Radio ID.
Make a note of your Radio ID
For each SiriusXM Vehicle Connect tuner, peculiar Radio ID is assigned. To confirm your Radio ID, tune to channel 0. The letters I, O, S and F are not used in any Radio ID.
The Radio ID is also located on the label of the SiriusXM Connect Vehicle Tuner.
How to activate your SiriusXM Service
Go to www.siriusxm.com/activatenow or call
To activate SiriusXM Canada service go to www.xmradio.ca and click on “ACTIVATE RADIO” in the top right corner, or call
16.2 Basic operations
Search for a channel
1Press [8SRC] to select SIRIUS XM.
2Press [ 1] repeatedly to select a band (SXM1,
SXM2, SXM3, SXM4).
3Press [E] / [F] to select a channel.
Channel Preset Memory
Press and hold [1] to [6] to memorize the current channel.
“STORED” appears.
Recall the channels in the memory
Press [1] to [6] to recall memorized channel.
About Mix Station preset mode
•In Mix Station preset mode, different bands and tuner sources (HD Radio, SiriusXM) can be saved in the same preset layer, which allows you to recall the desired station without switching between bands or tuner sources.
A maximum of six stations can be preset in the Mix Station preset mode. See <PRESET TYPE> (page 11)
Display Selection
Press [SCRL DISP] repeatedly to select an information.
CHANNEL NAME ; ARTIST NAME ; SONG TITLE ; CONTENT INFO ; CATEGORY NAME ; CH (channel)
NUMBER ; CLOCK
16.3 Category search
You can select the channel and category you want to receive.
1Press and hold [ 1] to enter Category Search mode.
“CAT SEARCH” appears.
2Turn the volume knob to select a category, then press the knob.
3Turn the volume knob to select a channel, then press the knob.
You cannot search for a channel until the category information is acquired.
To cancel the Category Search mode Press [ 6] once or twice.
16.4Direct Access Tuning using the remote control (RC-406)
1Press [DIRECT]. “– –
2Press the number buttons to enter the channel.
3Press [E] / [+F] to tune in to the entered channel.
To cancel Direct Access Tuning mode Press [ 6].
Automatic cancellation
•If no operations is done for 10 seconds after step 3, Direct Access Tuning is automatically canceled.
16.5 SiriusXM Replay™
You can replay up to the last 60 minutes broadcasting of current channel.
1Press [ 6] to enter Replay mode.
“REPLAY MODE” appears.
The “+” indicator stays lit during Replay. In Replay mode, you can use the following
playback functions:
To exit Replay mode.
Press [ 6].
“LIVE MODE” appears, and then the
Replay mode is automatically cancelled and go to Live mode when playback position is reached to Live by skip up or other reasons.
When receiving channel is changed
•Recorded data of the previously received channel is cleared immediately when a different channel is received.
38 | English 39 |