4. CD/ USB/ iPod
4.5Direct Music Search using the remote control (RC-406)
Not available if Random Play,
1Press DIRECT to enter Direct Music Search mode.
“– –
2Press the number buttons to enter the track number.
3Press [E] / [+F] to search for the music.
To cancel the Direct Music Search mode Press [ 6].
4.6 Setting the skip search ratio
(Function of iPod,
1Press the volume knob to enter Function mode.
“FUNCTION” appears.
2Turn the volume knob to select SETTINGS, then press the knob.
3Turn the volume knob to select SKIP SEARCH, then press the knob.
4Turn the volume knob to select the skip search ratio from the following options then press the knob.
0.5%/ 1%/ 5%/ 10% : Sets the ratio of skip when
searching for a song in Music Search mode. (Holding [E] / [F] for 3 seconds or longer skips songs at 10% regardless of the selected ratio.)
5Press and hold [6] to exit.
4.7 More information
Handling discs
•Do not touch the recording surface of the disc.
•Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
•Do not use any accessories for the disc.
•Clean from the center of the disc and move outward.
•Clean the disc with a dry silicon or soft cloth. Do not use any solvents.
•When removing discs from this unit, pull them out horizontally.
•Remove the rims from the center hole and disc edge before inserting a disc.
Discs that cannot be used
•This unit can only play the CDs with 
.
•Discs that are not round.
•Discs with coloring on the recording surface or discs that are dirty.
•You cannot play a Recordable/ReWritable disc that has not been finalized. (For the finalization process refer to your disc writing software, and your disc recorder instruction manual.)
•
About Audio file
•Playable Audio file
:
*1: Only for USB device.
•Playable disc media:
•Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name.
•Playable USB device file system: FAT12, FAT16, FAT32
Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device.
•Detailed information and notes about the playable audio files are stated in an online manual on the following site: www.kenwood.com/cs/ce/audiofile/
About USB device
•This unit can play audio files stored on a USB mass storage class device.
•Install the USB device in a place where it does not interfere with your driving.
•You cannot connect a USB device via a USB hub and Multi Card Reader.
•Make sure all important data has been backed up to avoid losing the data.
•Connecting a cable whose total length is longer than 5 m can result in abnormal playback.
•A USB connection cable,
About compatible iPod/iPhone
Made for
•Latest compatible list of iPod/iPhone.
For details, see: www.kenwood.com/cs/ce/ipod
•Type of control available varies depending on the type of connected iPod.
For details, see: www.kenwood.com/cs/ce/ipod
•The word “iPod” appearing in this manual indicates the iPod or iPhone connected to this unit with a connection cable,
•If you start playback after connecting the iPod, the music that has been played by the iPod is played first.
In this case, “RESUMING” appears without displaying a folder name, etc. Changing the browse item will display a correct title, etc.
•You cannot operate iPod if “KENWOOD” or “å” displayed on iPod.
About “KENWOOD Music Editor Light” and “KENWOOD Music Control”
•This unit supports the PC application “KENWOOD Music Editor Light” (hereinafter
•When you use the audio file with database information added by the “KENWOOD Music Editor Light” or “KENWOOD Music Control”, you can search for a file by title, album or artist name using Music Search.
•“KENWOOD Music Editor Light” and “KENWOOD Music Control” are available from the following web site: www.kenwood.com/cs/ce/
14 | English 15 |