Kenwood KDC-MP445U, KDC-X494, KMR-440U Tuning, Example:, ] button, Press the, Preset Tuning, 3Recall the station, Press the [] button, Select the HD AM band, Station Preset Memory

Function of KTC-HR300/ KTC-HR200 (Optional Accessory)

HD Radio™ tuner control

Tuning

Selecting the station.

1Select HD Radio source Press the [SRC] button. Select the “HD RADIO” display.

For how to select source item, refer to <Power and source selection> (page 4).

2Select the HD FM bandPush the Control knob towards up.

Switches between the FM1, FM2, and FM3 bands each time you push towards up.

Select the HD AM bandPush the Control knob towards down.3Tune up or down program

Push the Control knob towards right or left. If the sub channel is available in Digital FM broadcast when 37 Seek Mode of <Function setting> (page 16) is set to Auto seek or Manual, the channel can be switched.

Example:

[4]	Analog FM 1
	Analog FM ™		Digital FM 2
	Analog FM £		Digital FM-1ch 3
			Digital FM-2ch 4
			…
[¢]			Digital FM-8ch 0
			Digital FM !
(HD FM band)		<Tuning Mode> : Auto seek or Manual
			<Receive Mode> : Auto mode

•During the reception of 1, tune up:

2➡3➡4…

•During the reception of !, tune down: !➡0…

⁄

•By using the 39 Receive mode of <Function setting> (page 16) the modes can be switched to digital broadcast automatic switching, analog broadcast only, or digital broadcast only.

•When “Digital” has been set with “Receive Mode”, the seek time will be longer to allow a check of whether the transmission is a digital broadcast.

•It will take few seconds to receive the digital broadcasting after selecting the frequency.

•When Tuning up, it will switch to the next frequency if it is switched before receiving a Digital broadcast. (™➡£)

•When Tuning down, it will received an Analog broadcasting if a Digital broadcast is not received. (!➡£)

Station Preset Memory

Putting a station in the memory.

1Select the frequency to put in the memory Push the Control knob towards right or left.

2Enter Preset Memory mode Press the [] button.

“LIST & MEMORY” is displayed.

3Select the number to put in the memory Turn the Control knob.

4Determine the number to put in the memory Press the [ENTER] button for at least 2 seconds.

Cancelling the Preset Memory mode Press the [] button.

Preset Tuning

Recalling the stations in the memory.

1Enter Preset Tuning mode Press the [] button.

2Select a desired station in the memory Turn the Control knob.3Recall the stationPress the [ENTER] button.

Cancelling Preset Tuning

Press the [] button.

24 KDC-X494/ KDC-MP445U/ KMR-440U