Satellite Radio tuner (Optional Accessory) control

Basic Operation

Selecting Satellite Radio source

Press the [SRC] button.

Select the “SIRIUS” or “XM” display.

For how to select source item, refer to <Power and source selection> (page 4).

⁄

•You need to register to the service provider to receive the service by Satellite Radio. Consult the service provider if “CALL … TO SUBSCRIBE” appears.

•The radio may take a little time to start receiving after you select the Satellite Radio source.

•If the signal reception fails, “Acquiring Signal”/ “No Signal” appears.

Selecting the channelPush the Control knob towards right or left.Selecting the Preset BandPush the Control knob toward up.

Each time you push the knob, the preset band alternates between the SR1, SR2, SR3 and SR4.

Category and Channel Search

Selecting the channel and category you want to receive.

1Enter Category and Channel Search mode Press the [] button twice.2Select the CategoryTurn the Control knob to select Category, and then press the [ENTER] button.3Select the ChannelTurn the Control knob to select Channel, and then press the [ENTER] button.

Cancelling Category and Channel Search mode Press the [] button for at least 1 second.

⁄

•You cannot Channel search until the category information is acquired.

Channel Preset Memory

Putting the channel in the memory.

1Select the channel to put in the memory Push the Control knob towards right or left.

2Enter Preset Memory mode Press the [] button.

3Select the number to put in the memory Turn the Control knob.

4Register channel to preset numberPress the [ENTER] button for at least 2 seconds.

Cancelling the Preset Memory mode Press the [] button.

⁄

•Only the channel number is stored. Category information is not stored.

Preset Tuning

Recalling the channels in the memory.

1Enter Preset Tuning mode Press the [] button.

2Select a desired channel in the memory Turn the Control knob.3Recall the channel

Press the [ENTER] button.

Cancelling Preset Tuning

Press the [] button.

Channel Scan

Every receivable Channel is checked for 10 seconds.

1Start Channel ScanPress the [S.MODE] button.2Release it when the channel you want to listen to is received

Press the [S.MODE] button.

26 KDC-X494/ KDC-MP445U/ KMR-440U