4Make a call

Press the [ENTER] button.

⁄

•Pressing [S.MODE] button each time switches between name and telephone number.

•The outgoing call list, the incoming call list, and the missed call list, are the lists of calls originated from and received at this unit. They are not the ones stored in the cell-phone memory.

Speed dialing (Preset dial)

1Enter Bluetooth mode

Press the [FNC] button for at least 1 second. “BT MODE” is displayed.

2Select the number you want to recall from the memory

Turn the Control knob to select recall number (“P1” – “P6”), and then press the [ENTER] button.

3Make a call

Press the [ENTER] button.

⁄

•You need to register the preset dial number. Refer to <Registering to the Preset Dial Number List> (page 29).

Registering to the Preset Dial Number List

1Enter the phone number you wish to register Enter the phone number with reference to the following:

Dialing a number/ Calling a number in the call log/ Calling a number in the Phone Book

2Enter Preset Memory mode Press the [] button.

3Select a number and store it in the memory Turn the Control knob to select memory number (“P1” – “P6”), and then press the [ENTER] button for at least 2 second.

Cancelling the Preset Memory mode Press the [] button.

During a callDisconnecting a Call

Press the [SRC] button.

Switching to the Private Mode

Push the Control knob towards right or left.

Switches between Private talk (“PRIVATE”) and Hands-free talk each time this button is pressed.

⁄

•Depending on the type of your cell-phone, switching to the private talk mode may select the source that was used before commencing the hands-free connection. If this happens, the source cannot be switched back to the hands-free talk mode by operating this unit. Operate your cell-phone to return to the hands-free talk mode.

Adjusting the Voice Volume during a Call Turn the Control knob.Call waitingAnswering Another Incoming Call with the Current Call Suspended1Press the [ENTER] button.2Turn the Control knob to select “Answer”, and then press the [ENTER] button.Answering another Incoming Call after Terminating the Current Call

Press the [SRC] button.

Continuing the Current Call

1Press the [ENTER] button.

2Turn the Control knob to select “Reject”, and then press the [ENTER] button.Answering the Waiting Call after Terminating the Current Call

Press the [SRC] button.

Switching between the Current Call and Waiting Call

Press the [ENTER] button.

Each pressing of this knob switches the calling party.

English 29