Function of remote control

Direct Access Tuning

Entering the frequency and tuning.

1Select the bandPress the [FM] or [AM] button.2Enter Direct Access Tuning modePress the [DIRECT] button on the remote control.

"– – – –" is displayed.

3Enter the frequencyPress the number buttons on the remote control.

Example:

Desired frequency

Press button

92.1 MHz (FM)

[0], [9], [2], [1]

810 kHz (AM)

[0], [8], [1], [0]

Cancelling Direct Access Tuning

Press the [DIRECT] button on the remote control.

Station Preset Memory

Putting a station in the memory.

1Select the band

Push the Control knob towards [FM] or [AM].

2Select the frequency to put in the memory Push the Control knob towards [4] or [¢].

3Put the frequency in the memoryPress the desired [1] — [6] button for at least 2 seconds.

The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] — [6] button.

Auto Memory Entry

Putting stations with good reception in the memory automatically.

1Select the band for Auto Memory Entry Push the Control knob towards [FM] or [AM].

2Open Auto Memory EntryPress the [AME] button for at least 2 seconds. "A-MEMORY" is displayed.

When 6 stations that can be received are put in the memory Auto Memory Entry closes.

Preset Tuning

Recalling the stations in the memory.

1Select the band

Push the Control knob towards [FM] or [AM].

2Recall the stationPress the desired [1] — [6] button.

English 15